This product is suitable for 12V cars. The main circuit part uses original chips from ST, brand relays, and solid-state capacitors, ensuring stable performance and reliable quality. The remote control chip is original American MICROCHIP: a bidirectional remote control chip, using super-heterodyne radio frequency technology, with an effective transmission distance of up to 1500 meters!

Main functions:

1. Remote Start/Stop

2. Remote central door lock defense/withdrawal

3. Central Lock Automation (Automatic locking of doors after starting the vehicle by stepping on the brake, and automatic unlocking after turning off the engine)

4. Mute Anti-Theft Mode

5. Double Defense (If the door is not opened within 30 seconds after unlocking, the system will automatically enter defense mode)

6. Unlocked Prompt / Door Unclosed Prompt

7. Anti-theft alarm trigger identification function

8. Door Unlocked Warning Function

9. Remote Car Finder

10. Anti-theft vibration recording/prompt

11. Emergency Anti-Robbery

12. Emergency Call

13. Anti-theft engine immobilizer function (unable to start the vehicle inside the car after locking the doors)

14. Auto Defense (Auto defense after engine off and door closed for 1 minute)

15. Anti-theft Tip (After the engine is turned off and the door is closed, the owner is reminded to set the defense)

16. Remote control to open the trunk

17. Power Off Memory

18. Emergency Reset Function

Packing Contents:

1 x Car Dual-Direction Host
2 x LT836 bidirectional remote control
1 x Reset Switch
1 x LED indicator light
1 x Car Bi-directional Start-up Wiring
1 x Antenna
1 x Six-Tone Horn
1 x Remote Control Silicone Cover
6 x black zip ties
1 x Car Dual-Direction Instruction Manual (English Version)
2 x batteries
1 x Vibration Sensor
1 x Relay

Packing Specifications:

1. Packing Quantity: 10 sets/case
Net weight: 8.5kg
Gross weight: 10.5kg
3. Packaging dimensions: 328*300*435mm

A set of specifications separately:
Weight: 1.2kg
2. Packing Size: 32*15*9cm

Tips for Use: After setting the defense.If a detection point is continuously triggered for a long time, the security system will only report for 4 minutes and then automatically stop the alarm. If other sensors are triggered.Time to re-check all testing points, and still detected at this time.A detection point has been triggered continuously for a long time, and then the alarm was triggered for 4 minutes (at this time, the alarm information must include the recently triggered sensor and the sensor that was previously continuously triggered).

Factory Strength