1500 meters two-way alarm, remote control, shock alarm, remote control, cold/hot technology

One-click startCar Anti-Theft Device

Function Parameters:

1. Remote Start/Stop

2. Remote central door lock defense/withdrawal

3. Central Lock Automation (Automatic locking of doors after starting the vehicle by stepping on the brake, and automatic unlocking after turning off the engine)

4. Mute Anti-Theft Mode

5. Double Defense (If the door is not opened within 30 seconds after unlocking, the system will automatically enter defense mode)

6. Unlocked Prompt / Door Unclosed Prompt

7. Anti-theft alarm trigger identification function

8. Door Unlocked Warning Function

9. Remote Car Finder

10. Anti-theft vibration recording/prompt

11. Emergency Anti-Robbery

12. Emergency Call

13. Anti-theft engine immobilizer function (unable to start the vehicle inside the car after locking the doors)

14. Auto Defense (Auto defense after engine off and door closed for 1 minute)

15. Anti-theft Tip (After the engine is turned off and the door is closed, the owner is reminded to set the defense)

16. Remote control to open the trunk

17. Power Off Memory

18. Emergency Reset Function

Packing Accessories:

1 x Car Dual-Direction Host
2 x LT832 bidirectional remote control
1 x Reset Switch
1 x LED indicator light
1 x Car Bi-directional Start-up Wiring
1 x Antenna
1 x Six-Tone Horn
6 x black zip ties
1 x Car Dual-Direction Instruction Manual (English Version)
1 x Vibration Sensor
1 x Relay
1 x SPY Standard Color Box

Packing Specifications:

1. Packing Quantity: 10 sets/case
Net weight: 8.8kg
Gross weight: 10.7kg
3. Packaging dimensions: 328*300*435mm

A set of specifications separately:
Weight: 1.2kg
2. Packing Size: 32*15*9cm

Use Tip: When triggered by various alarms, turn off the engine for 40 seconds. After the alarm is completed, the security system returns to the security state before the alarm. If it is triggered again or by other types of triggers, it will enter the corresponding trigger class alarm. After the defense, if a detection point is continuously triggered for a long time, the security system will only report for 4 minutes and then automatically stop the alarm. When other sensors are triggered, all detection points will be re-detected. If at this time, a detection point is still continuously triggered for a long time, another alarm will be reported for 4 minutes (at this time, the alarm information must include the newly triggered sensor and the sensor that was continuously detected).