Instructions:

1. Please do not inject boiling water, and the temperature should be controlled at about 75 degrees.

2. Do not fill the bag with more than 2/3 of its capacity to prevent hot water from overflowing and scalding when it expands.

3. After tightening the lid, carefully check for any leakage or un-dried water stains. The usual procedure is as follows: First, tighten the lid. Then, use a dry cloth to wipe away any water stains on the hot water bag. Finally, inspect it carefully. Lift the tail of the hot water bag, turn it over so that the head is down, and shake it vigorously. Observe carefully for any leakage. After eliminating the possibility of a quality issue with the product, confirm its use.

Notes:

It is recommended to use this product under adult supervision, regularly check if the hot water bottle leaks, and use it with caution in case of wear or damage to prevent scalding. Do not use the microwave to heat it, and avoid prolonged contact with the skin to prevent scalding. Do not add any additives, such as table salt. It is recommended to replace the product every two years to prevent aging. Please keep this instruction for future reference. This product is only intended for the above-mentioned purposes.

Rubber Hot Water Bag

Flute 500ml without a cover, packing number 150 pieces, case size: 45*36*29;
Medium size 1000ml without a cloth cover, packing number 80 pieces, case size: 45*36*26.

Large size 1750ml without a cloth cover, packing number 60 pieces, case size: 45*36*24"";
Extra Large 2000ml without a cover, packing number: 60 pieces per box or 50 pieces per box.45-36-27/45*36*24。

Note: Due to manual measurement, there may be 1~3 cm errors in the product.

The sizes may vary due to different batches. Please do not purchase if you mind the differences!!!

The size and weight of the products are different, and if you have any doubts about the shipping fee after placing an order, please contact our customer service for consultation!!!