Product Name: Rubber and Plastic Sealing Compound

Product color: black, gray, blue, red, transparent color

Product packaging: sucker card

Packing Quantity: 144

Crate volume: 0.08

Product Description:

 Color: Usually transparent or specific colors.

• Hardness: For example, Shore A45 or other hardness values.

• Mixing Ratio: such as 1:1 or other ratios.

• Tear resistance: may be within a certain range, such as 20 or higher.

• Tensile strength: e.g., 6.8MPa or other values.

• Elongation: e.g., 350%.

• Shrinkage Rate: Generally less than 0.1%.

• Viscosity: Commonly a few thousand cps (centipoise).

• Operation time: Under specific temperature conditions (e.g., 25°C), it may take 15-30 minutes or other time ranges.

Curing time: Under the same specific temperature (e.g., 25°C), it may be 12 hours or longer.

• Curing Method: Common methods include room temperature curing and moisture curing, etc.

• Temperature Range: Able to maintain performance within a certain temperature range, such as -40°C to 160°C.

• Shear strength: e.g., 0.6MPa or other values.

• Tensile strength: possibly 0.4MPa or other data.

Instructions:

1. Ensure that the construction surface is clean, dry, and free from oil and grease to improve the bonding effect.

2. Mix the glue strictly according to the prescribed mixture ratio.

3. Complete the construction within the operating time to avoid the glue from curing too early.

4. Avoid applying excessive pressure or external forces to the sealant during the curing process.

5. Note the storage conditions of the sealant, avoid direct sunlight, high temperature or humid environments.

6. During construction, pay attention to personal protection, such as avoiding contact with the skin and eyes. If contact occurs, it should be cleaned immediately or seek medical treatment.

Product images: