1. Small car stickers installation method (dry adhesive method):

1. Clean the body of the car and keep it dry.

2. Determine the position where the sticker is needed. Generally, apply the sticker slowly, smooth it out with a tool, and peel off the backing paper.

3. If the graphic is really not large, you can also tear off all the stickers and then paste them, but be careful not to have any accidental adhesions.

4. After pasting, press and scratch several times. Remove the transparent transfer film.

5. Slit the door seam with an office knife and then cover it with a flap.

6. Do not allow any separation or protrusion between the car stickers and the body.

2. Large Decal Installation Method (Wet Application Method): Tools: cloth, watering vessel, scraping tool or credit card

1. Clean the vehicle body, evenly sprinkle water on the parts to be pasted – to reduce the adhesive force of the sticker and facilitate adjusting the position.

2. Determine the position where you need to stick it. Slowly, while sticking, gently smooth it with a tool, and at the same time peel off the backing paper.

3. When encountering door handles or anti-scratch strips, cut the material according to the situation and wrap it in.

4. Adjust accordingly, and after confirming the general position of the pattern, use force to repeatedly scrape away water and bubbles.

5. Slit the door seam with an office knife and then wrap it tightly.

6. Do not allow any separation or protrusion between the car stickers and the body of the car.

7. Allow the water in the car decals to dry completely, if possible, you can dry them moderately by heating. Wait to wash the car after a day or two, depending on the weather.