【Pencil Usage Instructions】
 
Use and Maintenance:
Protect the metal surface coating (coating), prevent hard metal from collision and abrasion, and avoid contact with acidic and alkaline solutions. You can use a soft cloth to wipe it, keeping the pen body always new.
There are two types of water storage structures: the ink reservoir (single-use structure) and the ink reservoir and ink cartridge (dual-use structure).
（3）When using an ink absorber, please choose high-quality ink without sediment. Before storing it, wash the inside with clean water, shake it dry, and then store it. If you haven't cleaned it for a long time and want to use it again, please wash it first, and then use the ink.
（4）Please do not use ink with gelatin to prevent clogging the writing structure and affecting the water flow.
Plastic parts should not come into contact with organic solvents such as alcohol, and should not be placed at high temperatures (65°C).
(6) The structure of the writing should not be disassembled by oneself to avoid the loss or damage of parts.
（7）Ink cartridge and ink absorber usage:
A. Replace the ink cartridge: Remove the old ink cartridge and push the new one into the pen's tip with force. The spare ink cartridge is placed in the pen barrel according to the diagram;
Insert the rotary ink absorber: push it into the tip of the pen with force, then rotate the absorber's tail, first counterclockwise to discharge the air, then clockwise to suck the ink;
C、Insert the suction pen: Push it into the front of the pen with force, then push the suction rod to absorb ink.
D. Insert the pressure spring-type ink absorber: Push it into the front of the pen with force, then press the spring piece to suck the ink.
(8) Fountain Pen Cleaning:
The storage structure is dual-purpose, remove the ink cartridge or the suction device, immerse the tip and the front end of the pen into warm water until the deposits soften;
After inserting the ink cartridge back into the ink absorber, immerse the tip of the pen into warm water. Then hold the tail of the rotating ink absorber and rotate it counterclockwise or clockwise (for the pull-type ink absorber, push the pull rod back and forth; for the spring-pressure type ink absorber, continuously press the spring), change the water multiple times until the water is clear, and finally dry the ink absorber with a soft cloth and use it as needed.
To simply prepare a pen for use, simply immerse the tip in warm water, continuously squeeze and twist the ink absorber until the water is clear, and then let it dry after shaking it off.