The working principle of the integrated environmental protection and energy-saving boiler with gas
1. Fuel burns in the furnace, and different types of fuel produce different types of exhaust gases. Common boilers discharge these exhaust gases directly into the atmosphere. The gases contain pollutants such as sulfur dioxide, nitrogen oxides, particulate carbon, carbon monoxide, and volatile hydrocarbons, which pollute the atmosphere. However, these pollutants are also a good source of combustion energy. This furnace does not allow these substances and gases to be discharged directly into the atmosphere, but recycles them to form new fuels and then sends them back into the furnace. It also provides adequate oxygen and air for complete combustion, thereby maximizing heat utilization and achieving a thermal efficiency of over 84%, which is 23 percentage points higher than industry standards. This furnace also saves energy by 40-50% compared to ordinary boilers, significantly reducing energy consumption.
2. The integrated environmental protection boiler for gas uses a two-in-one structure of a gasifier and a boiler, using raw coal as fuel. By changing the furnace structure, clean combustion of coal is achieved. It divides the furnace space into a combustion chamber, a gasification chamber, and a burning chamber, and fuel combustion is carried out in stages in each chamber. First, coal enters the combustion chamber, and the gas produced in the combustion chamber (volatile matter and some CO, etc.) enters the gasification chamber, thus realizing the continuous conversion of coal-gasification-(semi-coking coal)-combustion-heat exchange. Volatile matter and CO produced by reduction in the combustion chamber are completely burned in the gasification chamber and burning chamber, improving the thermal efficiency of the boiler, eliminating the phenomenon of black smoke from the boiler, and meeting the national environmental protection requirements for emissions.
The integrated environmental protection boiler for gas ensures complete combustion of fuel, and it operates safely, is easy to operate, has reliable performance, and is suitable for a wide range of coal types.
3. The boiler heats up quickly and has sufficient output during operation. There is no chimney at the top of the boiler, and it automatically removes sulfur and dust. It can achieve high efficiency energy saving and environmental protection. It is a good economic and practical product. It is suitable for large, medium, and small enterprises, government agencies, schools, hotels, and bathhouses and other industries.
A. Fast heating: It takes only 3 minutes to heat water for bathing. The system can provide 3-100 tons of hot water per hour, and it takes 10-60 minutes to heat the water to 85°C for 50-30,000 square meters of heating area.
B. Multi-functional machine, suitable for both bathing and heating, and can be used for water-cooled air-conditioners and cabinets.