Warm Tip:

1: The product takes about 3 hours to fully charge, and you need to turn on the ON first before charging the product.

2: When starting the car, you need to turn the switch to OFF before starting the car.

3: The difference between our car power supplies with peak current of 400A and 600A is that the former has a burst current of 40C, which can start cars with a 4.0-liter engine or smaller. The latter has a burst current of 60C, which can start cars with a 6.0-liter engine or smaller, as well as diesel cars with a 2.0-liter engine or smaller. (Excluding cars with aging engines.)

5: If the product is not used for a long time, it is recommended to charge it once every three months.

6: Products need to be stored at room temperature, which is beneficial to the service life of the product.

Special Precautions for Using a Portable Power Bank

1. When starting the car, make sure to insert the blue plug firmly and fully, or it may affect the effect.

2. When starting the car, it is best to have a blue battery indicator above 60%, which can extend the product's service life.

3. If the car cannot be started, do not forcefully continue to start it. Check if the battery clips are securely fastened, and if the original car battery terminal is rusty or has dirt. Clean it up and then try to start the car again.

4. During the startup process, if the vehicle cannot be started at all (1-2 times), do not forcefully continue to start it. Further checks should be made to determine if there are any other faults. Otherwise, it may lead to the burning of the fuse and damage to the starting power supply.

5: When starting the car and using the clamp port to inflate the tire or other car-mounted electrical devices, you need to turn the switch to the OFF position.

6: Our store offers different styles of car power supplies in 400A and 600A. If your car exceeds the A number of our products, the power supply will automatically cut off power during the start-up process to protect the car. Simply plug in the charger to reactivate and it will work normally.

7: In the case of a car with no power or completely dead battery, connect the car power clamp directly to the positive and negative terminals of the car, and the car can be started. If the car is powered on, remove the positive terminal, clamp the clamp to the ground, and connect the negative terminal to the negative terminal, and the car can be started.

8: The first time you start the car, you need to fully discharge the product's battery, then plug in the charger to charge, and then start the car.