Product details, if you have any questions, please contact customer service at 18836999287.Notes
Installation Notes:
1. The machine should be installed on a level and solid ground.
2. Install the motor according to the specified requirements.
3. Before installing the belt, first check if the indexing force's rotation direction is consistent with the direction of the weed cutter. Once the direction is confirmed, adjust the installation of the belt and make sure the belt is tightened appropriately.
4. Adjust the various parts to normal, confirm the accuracy, and turn on the power to test the operation, checking each part.
Check if the fasteners are securely connected, and if there are any abnormal sounds or phenomena at the rotating parts.

Power supply precautions:
The motor operates with a relatively large current, so when using wiring, connect a motor-specific circuit breaker next to your home's electric meter. Directly connect from the circuit breaker to the motor. Do not use plugs or sockets. The wiring should be as thick as possible and as short as possible. The machine's location should be as close to the electric meter as possible, with the wiring being as short as possible, ideally within 10 meters. If the distance is longer, it's best to increase the wire size, using a wire with a diameter of at least 6 square (copper wire) or around 10 square (copper wire), or if in doubt, consult a electrician.