New Quick Copy Remote Control Product Specification

New fast copy type remote control product description

1Chip that can be cloned.

     2260All manufacturers2262All manufacturersPT2264and5326All manufacturersSC5262andHT600andHT680andHT6207andHT6010andHT6012andHT6014andSMC918Series527All manufacturers1527All manufacturers2240All manufacturersHCS101andHCS200\HCS201(Part of the code)、HCS300\HCS301(Part of the code, part of the microcontroller..........

1.Chips could be copied

2260(all manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101, HCS200, HCS201(p艺术代码HCS300\HCS301(Part of the code), part single chip microcomputer..........

2Clearing method:

 Press both the unlock and lock buttons at the same time (some shells are the up and down buttons),LEDThe indicator light flashes three times, release any button pressed, and press the other button without releasing it. Click the released button three times.LEDThe indicator light enters a rapid flashing state, at which point all data in the memory is cleared. After the data is cleared, the remote control will respond to any button press.LEDThe indicator lights are all off.

2.Code cleaning method:

Press the unlock button and the lock button at the same time. Some shells are the up button and the down button. After the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times. The LED indicator will enter into the fast flashing status.At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press.

3Clone method:

    One hand holds the original remote control, the other hand holds the clone remote control, and both remotes should be as close as possible.The ideal way to place the two remotes side by side on the desk is to keep them within a distance of zero.")Press the required clone button separately,LEDThe indicator light flashes rapidly three times, then quickly flashes again, indicating that the copy has been successful. The operation method of other buttons is the same. Some remotes have lower transmitting power, so they should be operated back-to-back with the original remote to ensure successful copying. If there are interference in the operating environment, avoid the interference and operate in a clear environment. If the copying is not working well, please clear the code and try again.

1. 3. Copy method

One hand keeps the original remote controller while another keeps the copy remote control. The two remote controls should be placed as closely as possible. The ideal situation is to put the two remote controls on the desktop side by side with zero distance respectively. Press down the copy button when the LED indicator light flashes quickly after three flashes.This copy is successful, other key operating methods are the same. Some remote controls have a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate. If the copy is not successful.It should be recopied after clearing the code.

4New Model Dual-Copy Remote Control Features:

1. 4. 新复制遥控器的特性

The four buttons could respectively copy four different types of chips, That is a remote control can operate four different types of facilities. The frequency is from 270MHz to 434MHz and more than ten frequency points. Faster copy data speed, not easy losing code, far distance.