Specifications:
Brand: U`King
Model:ZQ10064
Color: black
Material: plastic
Power: 500W
Voltage: 220V 50-60HZ
Light source: 5 three-in-one RGB lamp beads
Oil drum capacity: 100ml
Warm-up time: 2-3 minutes
Smoke volume: 6500cuft/min
Smoke time: about 20 seconds
Control mode: wire control, remote control
Operation method:
1. Remove all packages, open the fuel tank, pour high-quality smoke oil (not included in the package) and tighten the container lid.
2. After connecting the power supply and the signal receiver, turn the switch to "ON" and the machine will start heating. After the heating is completed, use the wireless remote control to control the fog machine spray.
3. If the fog machine stops working, please warm up again. When the temperature drops, it takes time to heat up again.
4. Frequently check whether there is enough misty liquid in the machine. If there is no misty liquid, the operation will seriously damage the machine.
5. If the machine has little fog, noisy or no smoke, please turn off the power and check the e-liquid, fuse, signal receiver and power plug.
Precautions:
-Keep the machine dry and clean.
-Use indoors.
-Only suitable for adult operation, children are not allowed to approach.
-Place it horizontally, do not tilt and turn it upside down.
-Please turn off the power or pull out the plug after use.
-Do not spray it directly on people at a distance.
-During use, the temperature of the product will become higher, so the distance between the machine and other substances should be kept above 100 cm.
-Put the machine in a well-ventilated place, do not cover the ventilation holes, and do not place flammable materials around the product (keep away from carpets, wooden boards and flammable materials).
-Do not add oil, gas, perfume and other irritating liquids to the sprayer.
-Please avoid the e-liquid contact with the skin and eyes, once contacted, please use clean water to wash immediately.
Keep clean:
-After about 40 hours of continuous use, please use 80% distilled water and 20% vinegar to clean the dirt in the refractory pipe.
-Remove the spray nozzle and clean it with vinegar to maintain the acceleration before heating. After cooling, reinstall the nozzle and add e-liquid for next use.
-Use a dry cloth to clean the machine and keep it dry during storage.
Packing list:
Smoke machine *1
Wire control *1
Remote control *1
Power cord *1
Screw *2
Bracket *1
Manual *1
