Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
|
Voltage
|
220-240VAC / 50-60Hz
|
|
|
|
||||
|
Fuel tank volume
|
1.2L
|
|
|
|
||||
|
Power
|
1500W
|
|
|
|
||||
|
LED quantity
|
4 colors (Red, Green, Blue, White)
|
|
|
|
||||
|
LED color
|
48x 3W ，4-in-1
|
|
|
|
||||
|
DMX channel
|
8
|
|
|
|
||||
|
Control method
|
DMX, LCD display, remote control，DMX self-propelled mode
|
|
|
|
||||
|
Packing size
|
68*45*46.5cm/26.77*17.71*18.30in
|
|
|
|
||||
|
Weight
|
23.7KG/52.24LB
|
|
|
|
||||
|
Steps To Use:
|
|
|
|
|
||||
|
Step 1:
|
First place the equipment on a flat ground, and leave at least 50 cm of space around the equipment machine.
|
|
|
|
||||
|
Step 2:
|
Pour bubble oil and mist oil into the corresponding marked boxes. Remember not to put them in different boxes by mistake.
|
|
|
|
||||
|
Step 3:
|
Plug the machine's power cord into the corresponding socket and turn on the machine. Turn the power switch to the pointed"ON" position and see what appears on the LCD display.
|
|
|
|
||||
|
Step 4:
|
"Preheating" will light up on the display, and after a few minutes the screen will show "Ready" to indicate that heating is complete.
|
|
|
|
||||
|
Step 5:
|
Use the control panel. Set the device to the desired operating mode by operating the touch screen.
|
|
|
|
||||
|
Step 6:
|
When finished using, turn off the device. Press the power switch to the "OFF" position and unplug the power cord from the outlet.
|
|
|
|
||||
|
Step 7:
|
If the equipment needs to be transported, the tank needs to be emptied through the connecting pipe and drain valve before transportation.
|
|
|
|
||||
|
Warm reminder
|
|
|
|
|
||||
|
Do not use it on smooth ground or floor tiles, as it is easy to slip. Because the e-liquid and bubble oil used contain oil and water, it is recommended to use it on grass.
|
|
|
|
|
||||
|
FAQ
|
|
|
|
|
||||
|
1.If the machine's ventilation is closed, can bubbles still emerge from the ventilation?
Answer: Yes, they can still spray out, but the bubbles won't reach the same height as when the ventilation is open. |
|
|
|
|
||||
|
2.If the air outlet is adjusted upward, can the bubbles reach a higher height?
Answer: Yes, adjusting the outlet upward will make the air blow upward, causing the bubbles to spray higher. |
|
|
|
|
||||
|
3.Does the product's LED light have a gradient effect?
Answer: Yes, it does. |
|
|
|
|
||||
|
4.How should the oil pump and nozzle be maintained?
Answer: After using bubble oil, spray clean water until the remaining bubble oil is expelled. No special treatment is needed for smoke oil. |
|
|
|
|
||||
|
5.How many hours can a 1.2L bucket of oil last?
Answer: Using the maximum smoke output, it lasts approximately 2 hours. At 15% smoke output, it can last around 6 hours. |
|
|
|
|
||||
|
6.Is the ratio of oil consumption between bubble oil and smoke oil 2:1?
Answer: Yes, that's the correct ratio. Bubble oil tends to be used up faster. |
|
|
|
|
||||
|
7.After using the oil, should it be poured out? How should it be cleaned and maintained?
Answer: No need to pour it out. Just filter the bubble oil pump with clean water until residual oil is expelled. Wipe it clean with a towel afterward. |
|
|
|
|
||||
|
8.In which places or scenarios are these smoke machines mainly suitable?
Answer: They are primarily suitable for bars, wedding halls, general event performances, birthday parties, live broadcasts, etc. |
|
|
|
|
||||
|
9.After use, the ground may have oil. What should be done? How long does an event last, and how much oil should be prepared?
Answer: Simply mop the oily floor with clean water. A full oil bottle in the machine is generally sufficient for one event,lasting about an hour, with each spray lasting around five minutes. |
|
|
|
|
||||
Update time：
TOP
