Product Name: Personality Flame Reflective Stickers, Bumper Scratch Stickers
Specification: Pair, carved and perforated
Color: black, white, red, yellow, blue, green.
Size: 12cm * 4.8cm, 19cm * 7.6cm (single size 19 * 3.5cm), 29 * 12cm, single flame about 29 * 6cm, pair 58 * 24cm, single flame about 58 * 11cm
Material: Reflective material (black is not reflective)
Weight: About 8 grams
The sticker is made by engraving with a reflective film, which is hollow. It has a transfer film on the surface.
This personalized flame sticker can be applied to the front, back, left, and right sides of the car, as well as the hood. It can cover small scratches and also add to the car's aesthetics. The flame designs come in different sizes, and we also have other sizes available. Please carefully check the sizes and select the sticker you need carefully.
Here are some other recommendations.
Some of you often ask how to stick this sticker. There is glue on the back of the sticker, so just stick it directly to the clean car body where you want to put it. If you want to stick a longer or larger sticker, please use a harder scraping board or an ID card to scrape it to make it flat. For larger stickers with transfer film, please carefully read the following method.
1. The adhesive method for small car stickers without transparent transfer film (dry adhesive method):
Tool: cloth, scraping tool or credit card
1. Clean the body of the car and keep it dry.
2. Determine the position where the sticker is needed. Generally, apply the sticker slowly, smooth it out with a tool, and peel off the backing paper.
3. If the graphic is really not large, you can also tear off the transparent transfer film and stickers and then paste them. But you must be careful not to have any accidental adhesions.
4. After pasting, press and scratch several times. Remove the transparent transfer film.
5. Slit the door seam with an office knife and then wrap it tightly.
6. Do not allow any separation or protrusion between the car stickers and the body of the car.
II. The adhesive method for large vehicle stickers with transparent transfer film (wet application method):
Tool: cloth, watering can, scraping tool or credit card
1. Clean the vehicle body, evenly sprinkle water on the parts to be pasted – to reduce the adhesive force of the sticker and facilitate adjusting the position.
2. Determine the position where you need to stick it. Slowly, while sticking, gently smooth it with a tool, and at the same time peel off the backing paper.
3. When encountering door handles or anti-scratch strips, cut the material according to the situation and wrap it in.
4. Adjust the position of the pattern to ensure that it is roughly in the right place, and then use force to repeatedly scrape away water and bubbles. Peel off the transparent transfer film.
5. Slit the door seam with an office knife and then wrap it tightly.
6. Do not allow any separation or protrusion between the car stickers and the body of the car.
7. Allow the water in the car decals to dry completely, if possible, you can dry them moderately by heating. Wait to wash the car after a day or two, depending on the weather.
