Product Name: 3D Spider Car Sticker

Material: Soft Plastic

Color: Red, Silver, Gold

Size: Individual spider 6 cm * 7.5 cm, full sheet 15.5 cm * 6 cm

Weight: 5 grams

 The product images are taken from the actual product, please rest assured to purchase!

1. The adhesive method for small car stickers with transparent transfer film (dry application method):

  Tool: cloth, scraping tool or credit card

  1. Clean the body of the car and keep it dry.

   2. Determine the position where you need to apply the sticker. Generally, apply the sticker slowly, scraping it flat with a tool as you go, and peel off the backing paper. 3. If the graphic is not very large, you can also remove the transparent transfer film and the sticker completely before applying. But be careful not to have any accidental adhesions.

   4. After pasting, press and scratch several times. Remove the transparent transfer film.

   5. Slit the door seam with an office knife and then wrap it tightly.

   6. Do not allow any separation or protrusion between the car stickers and the body of the car.
II. The adhesive method for large vehicle stickers with transparent transfer film (wet application method):

   Tool: cloth, watering can, scraping tool or credit card

   1. Clean the vehicle body, evenly spray water on the parts to be pasted - to reduce the adhesive force of the sticker and facilitate adjusting the position. 2. Determine the position where you need to paste. Slowly paste while gently scraping with a tool, and peel off the backing paper.

   3. When encountering door handles or anti-scratch strips, cut the material according to the situation and wrap it in.

   4. Adjust the position of the pattern to ensure that it is roughly in the right place, and then use force to repeatedly scrape away water and bubbles. Peel off the transparent transfer film. 5. Make a cut with an artistic knife at the door and seam, and then wrap it inwards.

   6. Do not allow any separation or protrusion between the car stickers and the body of the car.

   7. Allow the water in the car decals to dry completely, if possible, you can dry them moderately by heating. Wait to wash the car after a day or two, depending on the weather.