How to operate
1. Ignition
Turn the ignition knob slowly towards the "ON" direction until the pressurized ignition device makes a sound. If it doesn't light the first time, please try again. (If you turn the ignition switch to "OW" while it's not lit, there's a risk of leakage, so please be particularly careful).
When first starting to use, if there is air in the tube, it can be difficult to light. In this case, please observe and repeatedly light the flame.
After you light it, the flame will separate from the burner and burn normally. This is a normal condition. (This happens when the ambient temperature is high or when using a new gas cylinder. After 2 to 3 minutes, the flame will stabilize. Once it stabilizes, you can adjust the ignition knob slightly to use it.)
2. Firepower Soup Festival
When the ignition switch knob is turned in the "ow" direction, the fire will become stronger, and when it is slowly rotated in the "OFF" direction, the fire will become weaker. Please note that when using a small fire, the flame may be too small and easily blown out.
3. When the ignition knob returns to the "OFF" position, the gas output will stop and the fire will be turned off.
4. Disassembly and Storage of Cylinders
Turn the ignition switch to the "OFF" position, then open the side cover. Hold the bottom of the cylinder and pick up the screwdriver. After use, remove the air cylinder each time, and make sure to cover the cylinder and place it in a place with a temperature below 40°C for storage.
Do not place the lamp near a heat source, and stop using it when the gas is exhausted.