Operation instructions
For initial use or use after long-time storage, fill water into the kettle to the maximum level; then heat it to boil once or twice; pour the water and repeat above process for several times in order to remove the dust generated in the course of production and storage.
1. Put the power supply base on a flat surface.
2. Open the kettle and fill into appropriate amount of water(no greater than the MAX level).
Warning: Boiling water may eject if the kettle is over filled.
3. Close the kettle and put it on the power supply base.
Attention: The kettle body must be used together with corresponding power supply base!
4. Plug the power cord into 220V AC power supply.
5, Press down the cooking switeh to side I: and heating starts.
6. In more than 10 seconds after water boils (to remove Cl in the water), the cooking switch jumps off to the side A and cut off power supply. Of course you can also turn the cooking switch to side O at any moment in the course of cooking to cut off power supply.








