new standard 15-inch double-sided dart plate with 6 flying needles set leisure entertainment competition level dartboard

Usage Method:
1The installation dimensions of the dartboard:

(1The target center is the base point, and the hanging height is perpendicular to the ground.1.73The position of rice.

(2Throwing darts should stand at a horizontal distance from the target surface2.37The position of rice.

(3The vertical distance from the target to the throwing line should be2.93Mile, if this distance is accurate,The installation instructions state that the walls are vertical, and the ground is horizontal.

2The installation method of the dartboard:

(1Hang the accessory securely with two screws on the wall surface (it is recommended to use expansion plugs for cement walls).

(2Insert the longer screw into the center positioning hole on the back of the dartboard, but do not tighten it all the way, leaving about5cmThe distance.

(3will3Use small nails to pin the corners of the base to the three small positioning holes on the back of the target board. Please pay attention to the location of the positioning holes, approximately120"One degree.

(4Hang the screw on the hook of the hanging piece on the target.

(5Adjust the length of the adjusting screw to ensure that all three corner bases can firmly adhere to the wall and be securely hung.