rubber raft inflatable boat sunshade fishing tent shade sun protection rainproof

Water and land dual-use sunshade tent user manual

1. Open the packaging, remove the components, and arrange them in categories:
2. Unfold the outer tent cloth, take out the tent pole, connect it well, and then insert it into the tent cloth as shown in the diagram below:
When fixing the two tent poles, please note to lift the tent poles up and thread them through the two fixed points inside the tent:
Two long poles should be ensured to pass through the tent fabric evenly at both ends, and the center point of the tent fabric should also be the center point of the two long poles. After wearing, tie with the rope on the tent fabric.
3. Remove the 4 D-shaped clips from the ground anchor bag and fix them in the front and rear 4 threading holes or the paddle frame in the following manner:
4. Set up the tent, and insert the end of the long rod into the ring pin of the D-shaped buckle as shown in the diagram.
5. Hook the hooks on the elastic bands at the four corners of the tent cloth onto the D-shaped buckles.
6. Install the storage net
Adjust the position of the ceiling, and the tent is set up (the wind ropes can be used selectively)

Our company specializes in the production of various styles of umbrellas, tents, outdoor leisure rain gear, waterproof pads, sleeping bags, and other outdoor products.

Welcome new and existing customers to come and negotiate, custom-made samples!

Yiwu International Commerce City Phase II F1-10494A Store

Contact: Nancy Telephone: 18258019848 (WeChat)
Contact: Chen Xia Telephone: 13335939740