keyless entry system, remotely-piloted central locking, car central control door lock, keyless entry and unlock

lock

press the lock key on the remote control. the direction light will flash once and the door will be locked.ledthe indicator light will start flashing.

note:when the electric window signal is programmed as a siren output, the siren will whistle once after the door lock.

unlock

press the unlock key on the remote control. the direction light will flash twice and the door will be opened.

note:when the electric window signal is programmed as a siren output, the siren will whistle twice after the door is unlocked.

tail box

long press remote control lock key3seconds, turn signal flashing2times, tail box off.

long press remote control unlock key3seconds, turn signal flashing2times, tail box open.

car search

a.press the car search key and turn signal flashes. press any button to exit the car search mode. press the unlock button to disarm the system(three-button remote control does not have this function).

b:press the lock key,4press again after seconds, and the system enters the car search model.

electronic/vacuum central lock option

electronic central lock0.5seconds, vacuum central lock5seconds.

the default factory is electronic central lock.

window lifting

press remote controllockkey, the host will send25the second negative signal of the power window makes the window rise.

automatic central lock

accturnon:the central lock is automatically locked.

accclose:the central lock is automatically unlocked.

accopenon, press remote controllockkey:the central lock is automatically locked.

accopenon, by remote controlunlockkey:the central lock is automatically unlocked.

learning code

press the learning key inside the host for a long time, and the direction light will turn on and enter the learning mode.

press any button on the first remote control, and the turn signal flashes once to indicate that the learning code is successful.

press any button on the second remote control, and the turn signal flashes once to indicate that the learning code is successful.

after the learning is successful, the system will automatically exit the learning mode.

programming

1.power window/alarm signal function programming

after the host is powered on10within seconds, press and hold down on the remote controllockorunlockbutton to program the function.

lock:the default power window is negative.

unlock:negative siren

2.automatic central lock programming

host power on10within secondsacctransferon, press and presslock,unlockkey2second, the direction light is on, press the remote control button for programming:

press the lock button:accgoon, the door is automatically locked