factory direct sales car alarm system, one-way alarm with tail box opening, electrical automation, silent anti-theft alarm

1.anti-theft:

a. sound and light anti-theft: press the lock key, the horn rings, the light flashes once, the central locking is locked, and the led light flashes after 5 seconds, entering the security alert state.

b. mute anti-theft: press the mute key, the light will flash once, and the central locking will be locked. after 5 seconds, the led light will flash and enter the security alert state. mute anti-theft status vibration alarm horn does not prompt alarm.
2.remove anti-theft:
press the unlock key, the speaker sounds 2 times and the light flashes 2 times, the remote control lock is unlocked, and the security alert is removed at the same time.

3.emergency alarm:

in the anti-theft state, if the door is opened, the acc hits on, or the foot brake is stepped on, the alarm will be triggered, the horn will be called, flashing light, and the car will not start. after 15 seconds, the alarm will be stopped after it is triggered.

4.tail box:
a. press the unlock key for 2 seconds and turn it on at tail box. during fortification, press the unlock key for 2 seconds. when tail box is turned on, the anti-theft will be removed.

b. press the tail box key for 2 seconds and turn on tail box; (fifth key)

5.anti-grab mode: (programmable, 9 items in programming table)

a. while driving, press the mute button for 2 seconds. the light flash quickly prompts you to enter the anti-grab mode. press the lock key or the car search key to enter the anti-grab mode. the lights flash quickly and the horn rings. (if you press the lock key or the car search key again immediately, the engine will be turned off immediately) 40 seconds later, the engine will be turned off, only press the unlock key to exit the anti-grab mode (system default)

b. while driving, press the mute button for 2 seconds. the light flash quickly prompts you to enter the anti-grab mode. press the lock key or the car search key to enter the anti-grab mode, the lights flash quickly, the horn rings, and the engine will not be turned off. only press the unlock key to exit the anti-grab mode (for programming selection, see programming 9)

6.automatic anti-theft (programmable, programming table 2 items and programming table 6 items)

a. shut down after parking, close the door, remote control does not do any action, 20 seconds after the horn prompts three prompts anti-theft, after 10 seconds the system will automatically enter the anti-theft but the door will not lock. (system default)

b. shut down after parking, close the door, remote control does not do any action, 20 seconds after the horn prompts three prompts anti-theft, after 10 seconds the system will automatically enter the anti-theft but the door automatically locks. (refer to 6 programming items for programming selection).

c. shut down after parking, close the door, remote control does not do any action, and the system will not automatically prevent theft (refer to programming 2 items for programming selection).

7.secondary anti-theft (programmable, 5 items in programming table)

a. after the anti-theft is removed, no action is performed within 30 seconds. the system will judge that the misunderstanding is removed and will enter the anti-theft again. (system default)

b. after the anti-theft is removed, the system does not do any action. (refer to 5 programming items for programming selection)

8.power-off memory

if the power is off in the anti-theft state, it will automatically enter the anti-theft state after power supply is restored.

9.door closing reminder

after fortification, if the door is not closed, the alarm will be entered after 60 seconds. at this time, the anti-theft should be lifted first, the door should be closed first, and then the defense should be set.

10.door opening reminder (programmable, programming table 7 items)

in unlock mode, whether the car is started or not, turn signal flashes for 15 seconds after opening the door. (by default, you can choose to close the door flashing light mode)

11.central locking automation (programmable, 3 programming tables and 4 programming tables)
a. press unlock when driving. the lock key can unlock and close the lock, but it will not trigger anti-theft (if the door is not closed, it will not unlock or close the lock)
b. close the door before driving, acc hit on, step on the foot brake, and lock central locking 15 seconds later. acc hit off to pull out the key central locking automatically unlock.
acc is on, open the door and then close the door, step on the foot brake, and lock the central locking.
if the door is not closed or the acc is not hit on, it will not be locked.

1. cancel the automatic lock (refer to 3 programming items for programming selection)

2. cancel automatic unlocking (refer to 4 programming items for programming selection)

12.car search
sound and light car searching: in the anti-theft or anti-theft state, press the car searching key for 2 seconds; the horn rings for 15 seconds, and at the same time flashing light. if you want to stop searching for cars, press the searching button again to stop. or press the unlocking button, central locking will unlock and release the anti-theft.
note: after 4 seconds of fortification, press the lock key to enter the car search function.

13.emergency call:
while driving, press the bell key for 2 seconds, the horn rings for 12 seconds, the light flashes for 12 seconds, and then press the car search key to stop.

14.alarm memory

if the fortification alarm is triggered, press the remote control to unlock it. the speaker prompts 4 sounds to remind the driver that the anti-theft system has been triggered.

15.vibration alarm to prevent false alarm (programmable, programming table 8 items)

a. if vibration-sensing continues to trigger, for example, there are animals on the car, or someone knocks on the car, the system will delay and enter the fortification state (when fortification, the vibration always triggers an alarm, and the system will delay to enter the security alert state)

b. if vibration-sensing continues to trigger, such as lightning, after 10 alarm cycles, the alarm will automatically shut down until the vibration trigger stops. after the trigger stops for 4 minutes, the system will be fortified. (after the fortification enters the alert state, the vibration alarm will not trigger the vibration for 10 times)

c. the vibration alarm mode can be turned on or off. (refer to programming project 8 selection)

16.emergency release

a. when the alarm occurs, acc hits on, and press the reset switch for 10 seconds within 5 seconds. the system releases the alarm and releases the anti-theft status. (suitable for host with emergency reset switch style, if the host without reset switch does not have this operation mode)

b. when the alarm occurs, drive the door, step on the foot brake, acc, stop at the on state from off-on-off-on-on-off-on-off-on, and the system releases the alarm, remove the anti-theft status.

17.electric/start lock (programmable, programming table 1 item)

electric lock is 5s, pneumatic lock is 5 seconds, system default is electric lock (programmable selection reference programming 1 item)

18code learning

remote control code learning method:

acc hit on and press the reset switch for 2 seconds. the speaker prompts a sound. the led indicator light is always on. press the remote control to learn at any button. the speaker prompts two sounds to indicate that the learning is successful. every successful learning, a remote control speaker prompts one sound, led flashes once, you can learn up to 2 remote control (suitable for host with emergency reset switch style, if the host does not have reset switch, this operation mode is not available)

remote control code learning method:

step on the foot brake and open the door. acc prompts two sounds from the speaker off-on-off-on-off-on3 times. the led indicator light is always on. press the remote control to learn at any button. the speaker prompts a sound to indicate that the learning is successful, one remote control speaker prompts two sounds for each successful learning, and the led flashes once. you can learn up to 2 remote control

20.restore factory settings (programmable, enter programming table11item operation)

21.repair mode (programmable, programming table10item)

after entering the repair mode, the system closes the vibration, foot brake, acc, and door trigger alarm.

22.programming

1. central locking selection (electric lock/pneumatic lock)

acc hit on, step on the foot brake, close the door; at the same time press the "lock + mute" button or (lock + car search) for 2 seconds, the horn rings once is an electric lock (0.5 seconds), the second ring is a pneumatic lock (4 seconds) (the default is an electric lock).

2. automatic anti-theft selection

acc hit off, step on the foot brake, close the door; press the "lock + unlock" button for 2 seconds at the same time, and the speaker sounds to turn on the automatic anti-theft mode, the automatic anti-theft mode is turned off after the speaker rings twice (the automatic anti-theft sheet is enabled by default without locking).

3. automatic central locking (lock selection)

acc hit on, step on the foot brake, close the door; press the "unlock + mute" button or (unlock + car search) for 2 seconds at the same time, and the horn rings to turn on the remote control automatic central locking lock function, the speaker sounds twice to turn off the remote control automatic central locking lock function. (enabled by default)

4 automatic central locking (unlock selection)

acc hit on, step on the foot brake, close the door; press "unlock + lock" for 2 seconds at the same time, and the horn rings to turn on the remote control automatic central locking unlocking function, the speaker sounds twice to turn off the remote control automatic central locking unlocking function. (enabled by default)

5 secondary anti-theft selection

acc hit off, step on the foot brake, close the door; press the "lock + mute" button or (lock + car search) for 2 seconds at the same time, the speaker will turn on the second anti-theft, the speaker sounds twice to turn off the second anti-theft (enabled by default)

6 automatic anti-theft lock selection

acc hit on, step on the foot brake, open the door; press the "unlock + mute" button or (unlock + car search) for 2 seconds at the same time, the automatic anti-theft bill will not be closed if the horn rings, the speaker sounds twice and automatically prevents theft and closes the lock. (default anti-theft lock is not closed)

7 open the door flashing light tips

acc hit on, step on the foot brake, open the door; at the same time, press "unlock + lock" for 2 seconds, the horn will open the door flashing light 15 times, and the horn will not open the door flashing light. (the default door is flashing light).

8 vibration alarm switch selection

when the system is in the anti-theft state, press "unlock + lock" for 2 seconds at the same time, turn on vibration-sensing with a sound of the horn, and turn off the vibration with two sounds of the horn. (the system is enabled by default)

9 anti-grab mode

acc hit off, step on the foot brake, open the door; press the "unlock + mute" button or (unlock + car search) for 2 seconds at the same time, the horn sounds and the anti-grab mode automatically turns off, the speaker sounds 2. the anti-grab mode does not stop. (default anti-grab will shut down)

10 repair mode

acc hit on, step on the foot brake, drive the door; press the "lock + mute" button or (lock + car search) for 2 seconds at the same time, the horn will not enter the repair mode with a sound, the speaker rings 2 times to enter the repair mode. (the repair mode is not entered by default)

11. reply to factory settings

acc hit off, step on the foot brake, open the door; at the same time press "unlock + lock" for 2 seconds, the speaker prompts four times to return to the factory settings.