laomai [homemade] ins enamel cup with lid large capacity drinking water tea mug vintage mug oiler

【Lao Mai Handmade Series】

IfFirst timePurchase enamel products

Please take 1 minute to check out the precautions before purchasing.

If it is acceptable, continue filming; if not, please proceed with caution.

1. Enamel is a handcrafted product that involves more than 64 steps. During the production process, uneven glazing, indentations, or scratches are inevitable.

2. The water cup has marks indicating hook holes, as well as black lines and voids in the porcelain glaze, all of which are present.

3. During the firing process, small air holes or small black spots, black lines, and embellishment defects caused by dust accumulation may occur.

4.The edge wrapping on the rolled products exposes a black underglaze and is not smooth; there are marks of hook holes inside the edge wrapping.

The hook holes and edge positions may have some rust; it can be removed with a cleaning paste.

5. The preservation lid has stains, especially oil stains. If it comes into contact with colored food, it must be cleaned immediately, otherwiseDyeing is difficult to clean!

The above is related to the enamel manufacturing processNormal phenomenon,Not a quality issue

Does not affect product quality or safety.

Please be cautious with posting if it is unacceptable!

Material: Enamel

It can be heated by open flame or electromagnetic/electrothermal stoves (open flame will not darken it).

1.5L cup: outer diameter 14 cm, inner diameter 12 cm, height 11 cm (with TPE preservation lid)

1.4L water bottle: outer diameter 13.5 cm, inner diameter 12.5 cm, height 14.5 cm (with cap, height 19.5 cm)

3.2L preservation container: 24 cm in length, 18 cm in width, 10.5 cm in height (with TPE preservation lid)

550ml small pot: Diameter 10 cm, height 8.5 cm