household dc100 timer kitchen timer thin large screen electronic timing reminder cross-border foreign trade 家用DC100计时器 厨房定时器薄款大屏幕电子计时提醒器跨境外贸

1) Countdown and clock functions

2) Maximum timing range: 99 minutes and 59 seconds

3) 12/2-4 Hour Clock

4) Can be used with magnetic attraction or placed vertically

5) Ultra-low power consumption; operating voltage is 1.5V (AAA), 1 unit

II. Operation Instructions

1. Follow the orientation instructions on the back of the device to open the battery door, install the battery correctly, then reseat the battery door, and the device will be ready for use.

2. When the clock is in operation, press the START/STOP button to switch to the countdown function. Additionally, pressing M\S\START/STOP will return to the clock state.

3. Clock settings: Press the S key while in clock mode to switch between 1 hour and 2 hours. Hold down M for about 2 seconds to enter time settings, where the time display will flash. Then press S to adjust the time value; hold down S to increase the value. After completing the adjustment, press M to enter minute settings, where the minutes display will flash. Again, press S to adjust the minute value; hold down S to increase it. Finally, press M to exit.

4. Countdown settings: Press S to set seconds in the countdown mode, and hold down to increase the value. Press M to set minutes, and hold down to adjust the value. After setting, press START/STOP to start the timer; pressing it again will pause it. When the timer reaches the set time, a beep sound lasting approximately 60 seconds will be played. Press START/STOP again to pause the timer or stop the sound. To clear the set time, press M\S simultaneously to reset to zero.

5.   Positive timing setting: When the timer is at zero, press START/STOP to start positive timing.

6. Note: In timing mode, it automatically returns to clock mode after 5 minutes of idling.