electronic salt salinometer food salt measuring pen kitchen handheld salinometer fresh water salt content detection 电子盐分盐度计 食品盐分测量笔厨房手持盐度计淡 水含盐量检测

Material: ABSBox weight: 79g
Box dimensions: 32.7*7.4*2.7 cmProduct dimensions: 2.5.2 * 3 * 1.5 cm

【Measurement Value Instructions】
Please refer to the functional description indicated by the saltometer.
Measurement probe: Salt concentration
7 red glowing LED lights;
0.3%–0.6% (moderate); 0.8%–1% (strong);
1.3%–2% (very strong).
A green LED power indicator light.
“ON” button: Press the button, the power light turns on, and then it is ready for measurement.
【Usage Instructions】
Clean the probe with clean water before measurement.
Let the item to be tested leak out a certain amount of liquid.
Press the power button. The green indicator light turns on. If not, check the battery level or replace the battery.
Insert the probe into the liquid or scoop up the liquid using a spoon so that the liquid covers the probe. Once the indicator light stabilizes, use the highest reading as the measurement result.
After the measurement is completed, clean the probe with clean water.
【Specifications】
Battery requirements: 4*1.5=6V AG13*4
Load current: up to 20 mA (all LEDs on)
Product dimensions: 252*26*15.5 (mm)
Product weight: approximately 36 grams
Measurement range: 0.3% ~ 2.0%
Temperature range of use: 60℃~80℃
Formula: Salt content = Total amount × Concentration
For example: The total mass of the glass solution is 150 grams, with a concentration of 0.5%
150 grams × 0.5% = 0.75 g
【Battery Replacement】
When the voltage is low, the green power light will not turn on. This indicates that the battery has low charge and needs to be replaced.
Remove the battery cover and take out the four used batteries for proper disposal to prevent children from touching them (as shown).
Place the 4 new batteries into the battery case (as shown).
Cleaning:
Rinse the probe with clean water or clean it with a neutral detergent.
Do not clean the device with water or using neutral detergent.
Do not use alcohol, diluents, or gasoline to clean the probe and the body.
Storage:
Avoid strong vibrations, otherwise failures are likely to occur.
Do not expose to prolonged sunlight or place in a humid environment.
If not used for a long time, please remove the battery.