"Product name" S2148 leather diamond mobile holder

"The weight" 0.19KG/(plus package)

"Qty" 100PCS/CTN

"Carton" 60*43*60CM

"The entire weight of the" 19KG

The "product overview"

This product is a versatile frame, made up of vehicle suction cup bracket and amazing clip. -Vehicle suction cup bracket and hang 1.2-1.5KG, materials are made of environmentally friendly materials, compliance with environmental requirements. Changeable clamp, integrated hydraulic photo multifunction fixed bracket tray design and versatile bracket. Design – tray can rotate 360 degrees allowing you to easily get mobile phone system, GPS, PDA, MP4 screen horizontal and vertical navigation needs. Universal---PDA, mobile phone or GPS navigation car bracket, bracket wings adjustable width, minimum 35mm, Max 90mm, spritz, down to the phone, GPS, PDA, MP4, you can clamp.

1. the use of super powerful cupule, stable and fast-absorbing windscreen.
2. design of hydraulic transmission, freely adjustable suction cup suction.
3. two-floor strengthening foam fixture, preventing the love machine forward fall.

"Product features"

1. modelling concept is novel and unique, flexible and convenient use.
2. with hydraulic damping, two-way bounce effect.
3. smooth motion, low noise, large clamp arm opening.
4. mix different holder may apply to the car or home.
5. apply various types of PDA, mobile positioning and GPS navigation.

"Product test specifications"
1. left and right slider closure minimum clearance 35mm,
2. slide maximum distance 90mm,
3. spring service life up to 500 times above.

【产品优势】


1. inherited the powerful features of the landscape, the smallest cell phone (35mm) and no PDA (90mm) will be able to use, there is no need to worry about your body. Buttons will not be pressed into.
2. automatic pop-up button, touch arms easy to automatically open, quickly remove the machines.
3. strengthen arms, widened wings on either side of 55mm,PDA+ back can be firmly fastened.
4. Super paste, paste in the windshield is more solid.
5. supports links, you can debug any bend angle.
6. standard accessories: subject, links, base (you can paste on the dashboard),family stickers!

"Installation instructions"
1. finger press the product button, smooth two-way bounce, your cell phone or PDA over a product surface, about gripping edges inward push clamp mobile phones or PDA.
2. when configuring the base, card entry into the base product, pull the Groove clamp

Install notes:
1. safety precautions do not use this product near or mounted on the airbag cover plate, or within the scope of the airbag opens.
2. design of abutments are not permanent fixtures of the windshield, the best method is to be used within the Foundation limits, to avoid suction cup suction exceeds the maximum.
3. tripod with suction cups and embedding jacks, not unibody design, therefore, reminds you when adjusting the angle, one hand pressed suction cup ends in one hand and began to adjust the angle of bending from a tripod, do avoid knot the endsat the fracture caused by the twisting or force.