Usage

1. Put jackhammer sleeve into the output square head with handle, and put the rocker on the other end.

2. Jackhammer sleeve put it on the nut to be removed (fastened), pay attention to the direction of tightness, shake the rocker to make the handle close to the side of the other Bolt.

3. When the nut is loosened, replace it with lengthening piece for quick disassembly. When tightening, tighten it with lengthening piece first and then lock it with power wrench.

4. Do not force more than 20 kilograms, otherwise the nut or parts of this product may be damaged.

5. Do not use the cylinder as a hammer tool.

6. Do not add hand crank to Rod set or force after the sled.

7. Pay attention to the tightness direction of the nut during disassembly. If a large force is used and the nut cannot be loosened, judge whether the shaking direction is reversed.