The fixer combines support, comfort and ease of use. We provide the holder with the high quality of skis holder of all the basic characteristics, experienced skier applies. The 3 d ankle strap, the foot is a good way to environmental protection, the toe strap toe in ski boots cingulate (toe), and provide good support and comfort

It is a high performance traditional skis fixer with mild ratchet buckle, which is very easy to buckle and very durable. This is a very good freestyle skiing all-terrain holder, follow one's inclinations, suitable for all levels of skiers/and even skiing park use. The trail back fixer is shorter, but it is very hard, can provide good skills behind the back of the support, can provide ankle flexibility when rotating at the same time.

The rotating belt system is located on the hinge, which can be turned outside when you lift your feet. When you put on your ski shoes, you will be able to unobstruct the ski shoes to the retainer. It also prevents skippers from stepping on their belts and hooks.

Factory Settings is suitable for most people, but you still can adjust the following Settings to suit your needs: - via mobile support the position of the back of the screw to adjust the back position (before/after/side), - back tilt, - the length of the antiskid pedal, especially useful for feet larger skiers.

\"Fit for your figure. But it's worth noting that all skis have a recommended position for a fixer (\" recommended stance\", the markings between the fixers). Increasing the position width will reduce your posture on skis and improve stability. This also helps you to rotate more easily. On the freestyle ski, the recommended position width is usually wider than the whole terrain board.

For trail and alpine skiing, we suggest that the front foot + 18 °, hind feet 0 °. Multipurpose use/freestyle, select + 18 ° and - 9 °. Set (open back switch that allows you to change the blade when more flexible). For freestyle skiing, please feel free to use completely symmetrical Angle, such as + 15 ° and 15 °. However, the fixer Angle is mainly a personal choice. See what others do and try different options. Waiting for you will be a big surprise.

The retainer disc has four screws that can slide along one axis, usually with five Settings. This setting is used to keep ski shoes in the center of the skis and prevent them from sticking out too much, or you will fall. Ski shoes must be evenly highlighted on both sides. The disk can also rotate 90 degrees to change the position width. In this case, you cannot choose to place the fixator in the center side.

We recommend that: M = 4.5 to 7.5 L = 8 to 12.5, like you can try on a ski shoe yourself, and we strongly recommend that you use your ski shoes to try on the fixer. Because, depending on the brand, the size of the same size may vary.