uhThe butter gun has four parts: handle, head, barrel and handle. The refueling nozzle can be divided into two types, namely, sharp nozzle and flat nozzle. Spring, steel ball exhaust screw, etc.
Use skills:
One is that the bowl is badThis is almost all of the domestic oil gun is a common problem, but it is no wonder that the structure of an oil gun is relatively complex compared with ordinary tools, sell it a dozen dollars, probably can only so
Second, the oil pressure mechanism is not good, but if the spring and check ball is no problem then probably can not be repaired.
Three is the use of some of the fault, the use of the fault is caused by their own operations, you can find a way to avoid. For example, once you mix a few grains of sand into the butter, and you use a pointed nozzle, you will be so angry that you will have to throw away the oil gun to solve the problem, and it is absolutely not good for the equipment, but in most cases it is self-caused. Therefore must keep the use of butter clean, do not use dirty tools to oil, oil containers should be promptly covered.
This is almost all of the domestic oil gun is a common problem, but it is no wonder that the structure of an oil gun is relatively complex compared with ordinary tools, sell it a dozen dollars, probably can only so;
Second, the oil pressure mechanism is not good, but if the spring and check ball is no problem then probably can not be repaired.
Three is the use of some of the fault, the use of the fault is caused by their own operations, you can find a way to avoid. For example, once you mix a few grains of sand into the butter, and you use a pointed nozzle, you will be so angry that you will have to throw away the oil gun to solve the problem, and it is absolutely not good for the equipment, but in most cases it is self-caused. Therefore must keep the use of butter clean, do not use dirty tools to oil, oil containers should be promptly covered.
One is the bowl is not good, this is almost all the domestic oil gun is a common problem, but it is no wonder that the structure of an oil gun is relatively complex compared to the ordinary tools, sell it for more than ten dollars, probably can only so;
Second, the oil pressure mechanism is not good, but if the spring and check ball is no problem then probably can not be repaired.
Three is the use of some of the fault, the use of the fault is caused by their own operations, you can find a way to avoid. For example, once you mix a few grains of sand into the butter, and you use a pointed nozzle, you will be so angry that you will have to throw away the oil gun to solve the problem, and it is absolutely not good for the equipment, but in most cases it is self-caused. Therefore must keep the use of butter clean, do not use dirty tools to oil, oil containers should be promptly covered.
response
1. If there is a hard pull rod, the rod can be pulled several times so that the air inside can be combinedgreaseMixing, reducing the size of individual bubbles may solve the problem, but not always.
2, the most effective method is to vent, but this requires hardware support, some guns have vent design, when you slowly open the vent screw when the air will come out.
3, the last is the final level of skill, and always successful, repeatedly build war, when you feel that there is gas and can not play as long as the oil gun body and pump body combined a few times or a few times back and forth (it is best to turn and press), to ensure your success. It's not hard, because as you rotate, the bubble is actually rotating to another part, which is filled with oil, and that solves the problem.
