【Material】: White Ash Wood Frame
【Outer Packaging】：Wooden Frame Packaging
【Color】: Image color (color can be customized)
【Inventory Status】: The customization cycle for regular products is 7-10 days, and the customization cycle for custom products is 15-25 days, which is determined by the quantity and manufacturing process of the products.
【Maintenance Instructions】: Use a cloth dampened with cleaning agent or neutral soap to wipe away dust. Note that furniture should not be immersed in water, exposed to direct sunlight, or subjected to forceful impact.

 Contact Number: 0579-85190608 15958956969

 Contact Phone: 13735713828 WeChat: 13735713828

 WeChat: 15958956969

 QQ: 1178196503

 Email: shiyufurniture@hotmail.com

Process Flow Supplemental Explanation

 1. High-temperature and high-pressure steaming, air-drying, and steam-chamber drying. High-temperature and high-pressure steaming extracts the high moisture content and residual glue from the wood, and steam drying makes the log reach the moisture content required for furniture production, simultaneously achieving the effect of sterilization and pest control. This makes the processed log not deform, mold, rot, or be infested, with a moisture content of essentially below 12%. At this time, the wood surface has a luster, uniform color, fine texture, and medium structure.

 Section Two: Drying Process is the first and crucial step in furniture manufacturing. How is it done? - Steam Drying. The drying process is divided into three steps:

  1. Preheating treatment: mainly low temperature and high humidity, to balance the temperature inside and outside the wood, and initially reduce the moisture content.

 2. Drying Stage: Mainly gradually increasing the temperature and gradually reducing the humidity, extracting the moisture inside and outside the wood, so that it reaches the moisture content we want;

  3. Final Processing: After further processing to ensure that the wood is uniform on the inside and outside and can remain at normal temperature, eliminating internal stresses caused by the drying process. III. Machine Processing 1. Wood Material Processing

  After drying the solid wood raw materials, they are processed at the solid wood component processing area through the following steps: a: Resawing/Sawing; b: Routing; c: Planing/Four-sided planing/Press planing; d: Plywood assembly; e: Routing/Longitudinal sawing/Guiding saw; f: Milling machine; g: (Copying) Lathe; h: Tenon-making/Drilling; i: Grooving/Carving/Sandblasting. For panel component processing: a: Material selection/Wood veneer matching/Seaming/Flower matching; b: Rough cutting/Edge binding/Frame making; c: Cold pressing/Hot pressing; d: Precision cutting/Edge sealing/Edge trimming; e: Coarse sanding/Fine sanding; f: Row assembly/Edge sealing; g: Drilling press/Bench drill; h: Single-column milling/Double-column milling; i: Processing center/Cleaning sanding/Manual edge sealing.

 ①做到牢、句、密、平、正。

 Attention: The moisture content of all solid wood components and tenons must be strictly controlled.

 ③ For each part with bending deformation, cracking, and other poor phenomena, it must be selected and processed.

 ④ Pay attention to the grain direction of panels, side panels, door panels, and pull-out panels, as well as the matching of patterns from left to right and top to bottom, and ensure that the colors are as harmonious and consistent as possible.

 Check the mold for loose or worn points when the semi-assembly is completed.

 No reverse, incorrect, over-tightened, broken locks, or misalignment should be present when assembling the group.

 Contact Number: 0579-85190608 15958956969

 Contact Phone: 13735713828 WeChat: 13735713828

 WeChat: 15958956969

 QQ: 1178196503

 Email: shiyufurniture@hotmail.com