Product material: New PP/ABS

Product dimensions: Main body: 24.5*19.5*24cm

Brush: 20.5*9.5cm

Air pump head: 8*3.7cm

Duckbill head: 15*3.7cm

Black hose: 100*3.7cm

Voltage and Power: 12V/90W

Color: Yellow is the main color. Large quantities can be custom-made.

Color box size: 22*21.5*25.5cm

Packing Information: Number of Pieces: 12PCS

Gross Net Weight: 11.5/13KG

Box Specification: 66*44.5*53cm

【注意事项】

1. When using, make sure to install the filter mesh.
2. Do not place in direct sunlight or high-temperature and high-pressure environments.
3. Do not use gasoline or volatile cleaning agents to wipe the main body.
4. The front cover of the motor cannot be removed when the motor is rotating.
5. This product is not a toy. Please do not allow children to play alone to avoid any danger.
6. This product cannot be directly plugged into household electricity, and it can only be used with a standard vehicle 12V power source.

【Usage Method】
1. Insert the cigarette lighter plug into the vehicle's cigarette lighter socket.
2. The power switch control key is located on the top of the handle. Push the control key to the ON position to use it, and push it to the OFF position to stop using it.
3. Change the nozzle according to the different usage scenarios, and the 5-meter long lighter connector cable is enough to cover any location in the vehicle for suction cleaning.
4. When using, place the inhaler flat against the ground to achieve the best effect.
5. There is a front shell device key in front of the power control key. Pressing it down can remove the front shell. When using it or when it is necessary to clean, remove the front shell to clean the filter mesh to extend the service life. When cleaning the filter mesh, it must be kept away from the eyes and ears.
6. This product should not be used to inhale burning substances, such as burning cigarettes.
7. If the vacuum cleaner is designed for both dry and wet use, it is important to pay attention to the height of the water drain pipe (capacity) when sucking up water or wet objects. The height of the object to be sucked should not exceed the water drain pipe. (You must turn off the machine, open the front cover to drain the water or wet liquid, and then reinstall it before you can use it again).

【Cleaning Method】
Method for removing foreign objects and the filter bag:
1. Remove the foreign object from the mesh bag, press the spring and turn the mesh bag to remove it. Insert your hand into the mesh bag to take out the filter bag, and pour the foreign objects out of the filter bag.
2. Clean the filter bag:
a、Wipe the filter bag
b. Shake the filter bag inside the garbage bag.
c、Clean with a cleaner, wipe with a tissue after cleaning, and confirm whether it is clean before using again.
3. Reinstall the filter bag.
Align the lower end of the filter bag with the mesh bag, so that they are installed together, causing the spring to be connected to the filter bag.
Plastic part cleaning:
Use a damp cloth with hot water and mild detergent, avoid using other detergents that may contain chemicals to avoid damaging the plastic parts.