How to clean a cigarette holder

External cleaning
  Wipe gently with a soft cotton cloth, especially the part of the mouthpiece that you bite. Since this part is often held in your mouth, it is important to pay attention to hygiene. It is recommended to heat it with boiling water before use, then wipe away the water with a tissue or shake it dry.

"内部清洗"可以翻译为 "internal cleaning" 或者 "housekeeping"。
1. If it is a replacement-type cigarette holder, the internal cleaning is very simple, as it is the filter that filters the smoke during use. Only a small amount of tar may leak due to loose installation on the inner wall of the cigarette holder, which can be cleaned by lightly wiping with a tissue or cloth.

2, the cleaning of the cigarette holder is mainly aimed at the cleaning type cigarette holder, as this type of cigarette holder can be cleaned and reused repeatedly, and the cleaning process plays a very crucial role in the use and filtering effect:

  It is recommended that users perform a simple wipe-down cleaning after using a half pack of cigarettes. Generally, when you feel that smoking is tight during use, it is time for cleaning. When cleaning, remove the sections one by one, and it is particularly important to note that when removing any style of cigarette holder, you should remove it in a spiral manner, as this has a significant impact on the sealing effect of the cigarette holder; after removal, clean the sections separately, and use a needle to clean the small holes in the filter.

  If it has been long since it was cleaned, it feels hard to clean the tar residue in the mouthpiece. After sectionally pulling it out, soak it in about 50 degrees Celsius water for about 10 minutes until it becomes soft, and then wipe it. You can also soak it in a little cleaning agent. This water cleaning method must wait for the water to naturally dry before using, or the odor of tobacco oil will affect your mood.

  Smoking tips made of high-grade materials require special protection. They are usually cleaned with alcohol or brandy. However, after cleaning, it is necessary to immediately remove the alcohol to prevent the plastic from becoming brittle. Therefore, please use with caution.

  Jiaxiong Hardware Filter Copper Head Cleaning Method:

  You need to clean it once if you smoke more than 10 cigarettes.

1. Remove the filter head (for those with built-in filters, use the configuration key to turn it out). For those with exposed filter heads, simply turn them out by hand.

2. Pull out the inner tube inside the filter head to see many black tar.

3. Wipe clean with a tissue, or rinse with water, or clean with alcohol; dry.

4. Check if the two small holes in the inner tube are unobstructed; if they are blocked by tar or other substances, you can clean them by inserting a toothpick or a small needle. (Note: If the small holes are blocked, smoking will be very difficult.)

5. Retract the inner tube, and the cleaning is complete; install it well and continue to use.

  Note: If the filter is not cleaned after smoking and left for a long time, it is easy for tar to form lumps inside (symptoms: it becomes difficult to smoke or you cannot inhale the smoke), which will make cleaning more difficult (often after simple cleaning, it still feels less smooth). In that case, it is best to use alcohol to soak clean. First follow the steps in the first and second paragraphs, then turn the back cover down. Soak it in alcohol for a while. Use a toothpick or thin metal wire to clean the inner tube and small holes (especially the two or four small holes) to ensure smooth flow; this is necessary. If you do not want to filter, you can also turn the back cover down and do not install the back cover. This is also possible, but it cannot filter out tar, but it also has a filtering effect, because the sea oak itself has a filtering effect. Traditional sea oak cigarette holders do not have a filtering core, and the filtering core was only researched in recent years.

Filtering Principle Explained

1. Attachment Effect
 
The Coanda Effect, also known as the Cona effect, is a phenomenon where gas tends to flow along the contours of a convex object when it deviates from its original flow direction. When oily smoke flows within the tobacco tank of a cigarette holder, this effect occurs. The most widespread application of the Coanda Effect is on airplane wings, where people use wings with different shapes on both sides to take advantage of the effect to change airflow speed and gain lift.
 
2. Small Hole Jet
 
Small hole jet refers to the phenomenon where fluid jets into a static environment through a small hole, and the discontinuous surface is subject to unavoidable disturbance, losing stability and generating vortices. At the same time, it continuously moves, deforms, and splits to produce turbulence. The small hole jet effect of the cigarette holder allows the rich in tar smoke to decrease from a speed of 120 meters per second to almost 0, thus evenly filling the tar storage, laying a good foundation for the work of the adhering effect.
 
3. Condensation Principle
 
Condensation is the process where a gas or liquid turns into a solid when it cools, such as when water vapor turns into water, or water turns into ice. The lower the temperature, the faster the condensation occurs and the better the results. Unfiltered smoke gas typically has a temperature above 40°C, and when it flows into a tar tank that is 10-20°C cooler than its own temperature, condensation occurs.

Shipping Management: We can ship by courier or logistics, and we will try to use logistics as much as possible. The cost difference between courier and logistics can be quite significant, sometimes up to around 100 yuan. However, if the distance is quite far, the delivery may be 1-2 days later, and the shipping cost is at your own expense. Therefore, we recommend that you try to ship a large package to save on shipping costs.