Packing Size: 165*79*45mm

Gross weight: 100g

Net weight: 78g

Packing Specification: 200 pieces per box Dimensions: 32 * 47 * 32CM, Weight: 24KG












 

How to clean a cigarette holder

External cleaning
  Wipe gently with a soft cotton cloth, especially the part of the mouthpiece that you bite. Since this part is often held in your mouth, it is important to pay attention to hygiene. It is recommended to heat it with boiling water before use, then wipe away the water with a tissue or shake it dry.

"内部清洗"可以翻译为 "internal cleaning" 或者 "housekeeping"。
1If it is a replacement-type cigarette holder, the internal cleaning is very simple, as it is the filter that is used to filter the smoke. The inner wall of the cigarette holder only has a small amount of possible tar leakage due to loose installation, which can be cleaned by simply wiping with a tissue or cloth.

2The main purpose of cleaning the cigarette holder is for the cleaning type cigarette holder, as this type of cigarette holder can be cleaned and reused repeatedly. The cleaning process plays a very crucial role in the use and filtering effect:

  It is recommended that users perform a simple wipe-down cleaning after using a half pack of cigarettes. Generally, when you feel that smoking is tight during use, it is time for cleaning. When cleaning, remove the sections one by one, and it is particularly important to note that when removing any style of cigarette holder, you should remove it in a spiral manner, as this has a significant impact on the sealing effect of the cigarette holder; after removal, clean the sections separately, and use a needle to clean the small holes in the filter.

  If it has been long time since the cleaning, it feels difficult to clean the tar hardened in the mouthpiece, after sectional extraction, soaking in50Soak in warm water for about ten minutes until soft, then wipe with a cloth. You can also soak it in a little detergent. This water cleaning method should be used after the water dries naturally, or the smell of oil will affect your mood.

  For high-end material cigarette holders, special protection is needed. They are generally cleaned with alcohol or brandy. However, after cleaning, immediately wiping off the alcohol component can make the plastic part of the cigarette holder become brittle, soPlease use with caution.

  Jiaxiong Hardware Filter Copper Head Cleaning Method:

  General draw10A cigarette or more and it needs to be cleaned.

1Transfer the filter head (for those with built-in filters, use the configuration key to turn it out). For those with exposed filter heads, simply turn them out by hand.

2Pull out the inner tube inside the filter headPlease provide the Chinese text you want to translate, and I will translate it into English for you.Can see a lot of black tar.

3Wipe clean with a tissue, or rinse with water, or clean with alcohol; dry.

4Check if the two small holes inside the tube are unobstructed; if they are blocked by tar or other substances,Please provide the Chinese text you want to translate, and I will translate it into English for you.You can use a toothpick or a small needle to clean it out. (Note that if the small hole is blocked, it will be very difficult to smoke.)

5Retract the internal tube, and the cleaning is complete; install it back, and continue using.

  Attention: If the filter is not cleaned after smoking and left for a long time, it is easy for tar to form lumps inside (symptoms: it becomes difficult to smoke or you cannot inhale the smoke), which will increase the difficulty of cleaning (often after simple cleaning, it still feels less smooth), in that case, it is best to use alcohol to soak and clean, first follow the steps in the previous section.1and2Step 1: Remove the back cover and immerse it in alcohol for a while. Step 2: Use a toothpick or thin metal wire to clean the inner tube and small holes (especially the two or four small holes) to ensure they are clear and clean. If you do not want to filter, you can also remove the back cover without installing it. This method is also effective, but it cannot filter out tar. However, it does have a filtering effect, as sea wood itself has a filtering effect. Traditional sea wood cigarette holders do not have a filtering core, and the filtering core was only recently researched.

Filtering Principle Explained

1. Attachment Effect
 
The attachment effect, also known as the Convergence Effect.Coanda EffectCoanda effect. It is a phenomenon where gas tends to flow along the convex object instead of its original direction of flow. When oily smoke flows in the tobacco tank of a cigarette, this effect occurs. The most widespread application of the Coanda effect is on airplane wings, where people use different shapes on both sides of the wing to take advantage of the Coanda effect to change airflow speed and obtain lift.
 
2.Small Hole Jet
 
Small hole jet refers to the phenomenon where fluid jets into a static environment through a small hole, and the discontinuous surface is subject to inevitable disturbance, losing stability and generating vortices. At the same time, it continuously moves, deforms, and splits to produce turbulence. The effect of small hole jet in a cigarette holder allows the rich in tar smoke to be ejected at a rate of 120The speed of rice dropped sharply to almost0Thus, it fills the tar tank uniformly, laying a good foundation for the wall effect.
 
3.Condensation Principle
 
Condensation is the process where a gas or liquid turns into a solid when it cools, such as when water vapor turns into water, or water turns into ice. The lower the temperature, the faster the condensation occurs, and the better the results.The temperature of unfiltered flue gas generally exceeds40"℃" is the symbol for Celsius temperature scale.As it flows into a cooler environment than its own temperature.10-20"℃" is the symbol for Celsius temperature scale.When the tar tank is filled, condensation will occur.

Shipping Management:Delivery and logistics are available, and we will try to use logistics as much as possible. The difference in freight costs between courier and logistics is significant, sometimes up to about 100 yuan. However, for longer distances, the delivery may be 1-2 days later, and the freight is at your own expense. Therefore, we recommend that you try to send a large package to save on freight costs.