Product model: JHS-400A

Product name: electronic kitchen scale
Equipped with high precision tension sensor system
LCD LCD with backlight band external ac power supply
Range: 1000 g X accuracy 0.1 g 5kg times accuracy 1g 10 kilograms X precision 1 gram
Auto reset/auto close (automatic shutdown over 10 minutes after no operation)
Unit selection (kg/g/ib/oz)
Overload/low voltage battery indication
Can use ac power, 9 volt -12 volt transformer. (the transformer is not included. The hardware store can buy it for ten yuan.)
Power: 1.5v * 2 AAA dry batteries (2 knots)
Ac power is also available (not to be Shared with the battery)

Usage:
 1. The boot:
      Put the electronic scale in a horizontal place and press the \"TARE\" button to start up the machine. At this time, \"8888\" will be displayed to detect the zero point. If you press the \"TARE\" button longer and hold it for two seconds, you will turn it off. If there is no weight weighing and no button to operate for 120 seconds, the electronic scale will shut down itself.
 
2. Unit conversion: 
   In normal weighing, press the \"MODE\" button to carry out \"g\" -> Oz -> Weight conversion between pounds (lb), 1 kg =35 ounces =2.2 pounds.
 
3. Peel them: 
   When using the container to load bulk goods to weigh, the container can be placed on the scale first, short press the \"TARE\" key, and after the weight window shows zero, the goods can be loaded to weigh, and then the net weight of the goods can be obtained.

4. Count

1) put a certain number of weight objects (such as 25,50,75,100) to be weighed.

2) after pressing the \"PCS\" button for two seconds, it will be displayed as \"100\".

3) press the \"MODE\" button and it will be displayed as \"25,50,75,100\".

Please select the number to be weighed. Then press the \"PCS\" button to confirm.Place the object in the center of the scale and the LCD screen will show the exact number of objects.

 
5. The calibration: 
   When you feel that the weight of the product is not correct, you can recalibrate it yourself. First to ready to calibration range of Jordan farmar, electronic scale boot first, rapid holding down the \"MODE\" button until the window shows \"CAL\" let go, again according to the \"CAL\", enter the calibration status, display \"3000\" (according to the capacity of the scale) flashing three times. Add 3, 000 grams of standard weight, depending on the scale's capacity, and wait three or four seconds before the display shows up\"PASS\" and \"3000\". Remove the weight, press ON/OFF, turn OFF the electronic scale, and complete the correction.