Material] alloy

[Weight] 365g (without gas)

[Specification] base 69MM maximum width 87MM height 144MM

[Internal pressure] 0.36 +/- 0.42MPa

[Color] Silver White + Black

[Lighter type] welding gun type windproof gas machine

[Flame temperature] 1500 degrees

[Burning time] it takes about 10 minutes to burn for each charge, and it can be used for 5 seconds each time.

[Gas capacity of the whole machine] 35ml (factory set safety capacity)

Micro-tool gas welding gun, gas welding gun adopts high-pressure injection technology gas is compressed in the supercharger, which is injected violently under the action of huge pressure. Butane gas is used as fuel, which can be used repeatedly as gas filled with ordinary lighters; It can generate high temperature flame, which can be used for camping ignition, electrical appliance repair and disassembly of flaky components. The flame can be adjusted and butane gas can be used. According to the mechanical design of human hand grip, press the switch with your thumb to use it, which is convenient to put it aside at any time during use. At the same time, it can also be placed on the bedside and table as a small decoration.

Select Switch, close the valve when not in use, safe, convenient and practical, rotate to open the valve, and then press the ignition key to spray fire, direct rotation control of the fire power, it is very safe to close the valve when not in use.

Inflation method: shake gas tank before inflating, then gas tank upside down inflatable nozzle facing down, press hard at the inflatable hole of welding gun, the inflation time is 5 seconds, release and dial out to complete inflation, and it can be used about ten minutes after inflation.

Flame range(Measured at room temperature of 22 degrees) the flame can be adjusted between 35mm and 10mm. The flame here refers to the dark blue flame area in the middle of the flame, and the maximum spray distance of the peripheral flame can reach about 200mm.

Firing method: turn off the air valve (control the flame size through the air valve) and press the ignition switch to ignite (note: the air valve must be closed after use)

Inflatable capacity: 24ml (safe capacity)

The spray gun adopts special alloy nozzle and high temperature ceramic sheath, which can generate high temperature flame. It is used to disassemble flaky components. The flame can be adjusted and the self-locking switch can be used after being pressed. Butane gas is used. Small size, no power supply, electronic ignition, special double locking function, sustainable fire injection, very convenient to use. There is a big difference between this product and windproof lighter. Few lighters can be used continuously for more than one minute, and the fire is scattered. However, this product can be used continuously without damaging the welding nozzle and protected by high temperature ceramic sheath, high concentration of fire and heat. Such as welding, cutting, repairing plastic products, repairing automobiles, motorcycles and other industries. It can also be used as a strong windproof lighter with adjustable fire power! (Suitable for people who like to do some small jobs, such as baking dental cast, baking, outdoor barbecue, small household appliances, etc.)

Features:

   ★The special locking function is very convenient to use (the locking switch is located at metal toe cap and the connection part of the gas tank). The combustion effect is good, and the flame is Blue at sufficient burning.

  ★It is a good helper for travel, adventure and camping,

  ★A must-have for field sports enthusiasts! The wild is more useful, and the non-combustible wet wood will be done immediately!

Purpose:

• ● cake surface fire/baking treatment
• ● fromage cake/mousse cake demoulding
• ● barbecue
• ● boiling water in the wild/cooking/hot pot, etc.
• ● fire in the wild
• ● handle Trotter, handle pig head, etc.
• ● metal surface cleaning