Manual PVC card cutting machine (also known as card punching machine)
Gauge: 21* 58mm
External size: 260mm×175mm×150mm
Weight: 6 kg
Load cutting life: ≤ 100,000 times
Load cutting thickness: ≤ 0.8mm
Loading and cutting mode: manual

Application: Cutting laminated PVC card, PET card and laminated card
Instructions and precautions
1. Open the package and install the handle.
2. Gently lift the handle to see if the rotation is normal
3. Cut the laminated business CARDS into pieces less than 110mm wide with a paper cutter and insert them into the feed guide slot of the card cutter. Quickly move the handle after positioning
4 pay attention when cutting blank holder can not less than 3 mm, more can't half a few slow cutting, otherwise there will be burrs or knife
Using this product, it is recommended to use the over-adhesive film of high temperature adhesive, otherwise there may be trace of virtual hair due to the gum
6. In case the screws are loose, the rough edges are too large or the rotation is not working properly during the use of the card cutting machine, the user cannot disassemble it by himself, and shall send it back to the point of sale for repair in time. The shop will not be responsible for any product that has been disassembled and repaired.