This is the new HT-508 of our company electric balloon pump, which has been improved on the basis of combining the original balloon pump. When the air pump is inflated, the wire cover is set to the form of the door, without taking it off, and there is no valve around the air pump, in this way, the suction of the air pump during inflation prevents the surrounding balloons from being sucked in and the motor cannot work normally, and it is equipped with two air nozzles with two small nozzles at the handle (lower than the handle), in this way, the air pump is prevented from breaking the air nozzle during transportation. The two air nozzles are both press-able, that is, if one of the air nozzles is broken, another air nozzle can be used, the service life of the air pump is more than half of that of other air pumps. In addition, the qualified date label at the bottom of the air pump is attached to the shipment, which is more convenient for product tracking and warranty. I hope all new and old customers can contact us to order.

        Product Introduction: This product has been improved on the basis of combining the original balloon pump: when the air pump is inflated, the wire cover is set to the form of the door, and there is no valve around the air pump, in this way, the suction of the air pump during inflation will prevent the surrounding balloons from being sucked in and the motor will not work properly. Both inflation Inlet are pushable, that is, if one of the air nozzles is broken, there is another air nozzle that can be used, which has half more service life than other air pumps before, and is equipped with two movable air nozzles, two small nozzles in the handle (lower than the handle), in this way, the air pump is prevented from being transported.

Product features:
(1) with two inflation Inlet
(2) two operation modes (fully automatic and semi-automatic operation)
(3) a push button
(4) give two movable pick-ups for free, which is convenient to charge balls for smaller balloons.
(5) advanced wire storage bin (when not in use, the wire can be hidden to prevent the wire from being damaged and causing potential safety hazards)
(6) equipped with automatic protection device, when the air pump is unattended or used for too long, the air pump will automatically disconnect the power supply.