Instructions:

2 x "AAA" batteries according to the battery compartment indicates the correct mounting, or connect an external power supply to the mains (DC=. 6V). place scale body in steady, wind-free surface.

1. 按“ ON ”键，等待5秒显示0.0；

2. the weight placed on the pallet surface when the s when the symbol appears in the upper-left, which is referred to the exact weight of the object;

3. press the UNIT key to change measurement units, G/KG/LB/CA (t)

4. press TARE to force goes to zero.

5. 开机状态下按为 ON/OFF 关机。

6. 校准功能：

By ON key 3 seconds to LCD displayed "0" Hou release press again by tare key confirmed and displayed a flashing of weights value (as 3000.0), at placed 3000g weights Yu tray, (if no suitable of weights can by TARE key select suitable of weights value for correction) Dang numerical flashing stop, and displayed current weights value, calibration finished. (Due to over temperature, when weighing or other reasons not allowed, please use this feature)