"Product name" digital jewelry scale "load range" 0.01 g-100 g, dividing a value of 0.01 grams of "weighing" g (gram), Oz (ounce) ozt (Troy ounce) DWT (pennyweight) CT (Carat), GN (grain) "screen display" LCD LCD screen "Packing" long 8CM* wide and 5CM* high 1.7CM "product of" long 7CM* wide 4CM "battery" 1 CR2032 lithium ion button cell (random distribution) 【产品包装】 Color box packing instructions in English.  "Key note":1, the middle of the circle: off 2, left the m key: unit conversion button 3, the t key on the right side: Peel the zero key, placed on the container, and then press this button to remove the container weight
instructions:

Put the battery in battery compartment indicates the correct mounting, place the scale body in steady, wind-free table.

1, press the power button to boot, wait three seconds showing 0.00;

2, the scale should be placed on the scale, numerically stable readings;

3, press the unit conversion button changes the weighing unit;

4, power on press power button off;

Unit conversion keys/m

Press this button to select one of your own-weight unit

Weight unit conversion value:

1ct/KELA =0.19997g 1oz/oz =28.3495g

British 1dwt/money =1.5552g 1ozt/troy ounces =31.1034g

1GN/=0.0648g

Peel the deduction

1) in accordance with the correct procedure for boot

2) pull the weights on the scale

3), then press the "t" key to display "0.00", indicates a deduction.

4) then put the items to be weighed, and readings is the net weight of the items.

Correction

1) turn zero

2) press and hold the "m" button 3 seconds flashes "CAL" after the m button is released

3) shortly flashes "200.00g"

4) 200g weight in scale Central, and later, displays "PASS" then 200.00g

5) remove the weights, you can enter the weight. Calibration is over!

If the calibration is not successful repeat the above operation.

Troubleshooting

Inaccurate weighing or failure of primary battery, incorrect calibration, overload or operate on non-level surface. Please note that the above mentioned several points, with correct use and maintenance of your product.

1) do not display or displays a low battery symbol [Lo], need to replace the battery

2) [o_Ld] overload, immediately remove overload

3) [o_Ld] due to error that scales the internal core damage to parts (for example, impact, dropping or overload), please try the calibration again, if the sensor is not badly damaged, you can reschedule after use.

4) shows "88888", where they are not affected by vibration, steady work on the plane.