precautions

1. In order to work with the maximum efficiency of sun shield, please put it in a place where the sunlight is direct and can absorb the sunlight for the longest time.
2. Indoor lighting energy is far less than sunshine, so it is better to put it in the sun to charge.
3. This product can also work normally on rainy days (but please do not soak it in the water), but it will shorten the brightness at night because of insufficient sunshine.
Lamp time.
4. Sun shield has photosensitive effect, and the light will automatically turn on after dark, but if the surrounding light is too strong, the light may not turn on, so please avoid putting it in the light
In addition, the photosensitivity of sun shield is not the same for every piece, so it is normal to light up earlier and light up later.
5. When using it for the first time, in order to make sun shield absorb sunlight more effectively, please tear off the protective film on sun shield.
6. If you need to turn on the lamp holder, please turn it clockwise gently to avoid breaking the wire due to excessive force.
7. Sometimes the light is not on, not because the battery is out of power, but because of the poor contact of the battery caused by collision. Please make sure that the positive and negative contacts of the battery are good.
8. Due to the self-discharge phenomenon of rechargeable batteries (commonly known as power transmission), if there is no electricity due to long storage, Please fully absorb sunlight to activate the battery.