First, the instructions: put the battery in battery compartment indicates the correct mounting, place the scale body in steady, wind-free table.

• Press power button to boot, wait three seconds to 0.1 or 0.01 ;
• Will have to weigh items on the scale, numerically stable readings;
• Press the unit key to change units of measure;
• Power on press power button off.

Second, the deduction/peeling/cleared

• Boot as described above;
• Place the buckle weights on the scale;
• Press Peel display 0.1 or 0.01, indicates a deduction;
• Then add the items to be weighed, and readings is the net weight of the items.

Third, correction

1, power on go to zero;

2, press the unit conversion button until CAL appears, press the unit conversion button, then flashing weight value.

3, place the appropriate weight in scale Central, later, show PASS, and then display the weight value, calibration is complete, after you remove the weights, you can carry out