maximum scale: 100g

index value: 0.01g

body size: 4.2*7.5*1.5cm

stainless steel pan size: 3.2*4.2cm

power: a button battery

The key to open the I MODE unit conversion key TARE zero key peeled

: TL oz CT g unit selection

, operation: the battery with battery instructions loaded properly, will be placed on the steady wind scale body surface.

• boot boot, wait three seconds display 0 ;
• will have to scale items in the scale, to be numerically stable after reading ;
• According to the unit conversion key units of measurement;
• boot boot shutdown state.

Two, buckle

• According to the above steps on ;
• will buckle heavy in the pan;
• in peeled keys display 0, said it had buckle;
• then add to the weighing items, this is the net reading articles.

Three, correction

1, boot to zero;

2, press and hold the unit transfer key until the CAL is displayed, press the unit conversion key, and then flash the weight value.

3, the corresponding weights placed on the scale of central, later, display PASS, and then display the weight value, the calibration is completed, remove the weights can be carried out after weighing.

Four, troubleshooting

The primary factors of the battery inaccurate or fault weighing, the calibration is not correct, or overload operation on a non horizontal surface. Please note the above mentioned points in order to properly use and maintain your product.

• < span style= font-family: _GB2312 tyle= color:#000000; italics; "&gt"; wore the permanent damage of the product.
• this product should not be exposed to extreme cold or heat environment, under normal circumstances the product can work very well, please before use, adapting products for at least an hour in a new environment.
• before use, start with weight several times to preheat the internal components of scale, it will make more accurate weighing.
• products will be placed in a clean environment, dust, moisture, vibration, air or electromagnetic interference will have adverse effects on the stability and accuracy of products. Tohandlegentlyand, weighing goods should be gently placed on the scale, so as to avoid inaccurate or internal parts weighing scale damage.
• because the product is of high precision products, so the use of very carefully and avoid vibration or drop.
• in calm level use.