I. product specifications:
1. Input: 12-24v;
2. Output: 5V 3100MA (USB1:2100 ma, USB2:1000 ma)
3. Power: 15.55w;
4. Blue LED power indicator;
5. Built-in safety pipe;
6. Dual USB interface output;
7. Built-in short circuit, overvoltage and overload automatic protection

Ii. [scope of application] :
     Suitable for Microsoft Surface tablet, mobile phone, MP3, PDA, bluetooth headset, digital camera. It can charge the ipad, iPhone, iPhone series, PDA, smartphone and digital camera.
   [shell material] :
The shell adopts pure PC raw material and the surface is highlighted.

Iii. Application method

1. The car charger has two different outlets For iPod/Others For charging different devices.

2. Plug the USB car into the cigarette lighter. At this time, the LED lights up red.

3. Connect the USB A to the car charging output end, and then connect the corresponding plug to the electrical equipment (such as mobile phone, MP3, camera series, etc.) for power supply or charging. Such as charge iPod The iphone USES a wired IPOD connector.

4. Please pull the car charger from the cigarette lighter after the equipment is fully charged.

Matters needing attention

1. Please start the car first and then insert the car charger.

2. Please pull out the car charger after use or after the car has stalled.
3. Please do not use the car charger of electronic products beyond the charging specification. When the two interfaces are used at the same time, it is recommended to charge

  The battery size within 2100mA is within the normal service range to avoid any problems caused by the non-conformity .
4. The car must be heated in the process of use. It is normal that the heating does not exceed 60c at normal room temperature.

5. When the car is overcharged, overheated and short circuit protection, it will stop working (the car will automatically resume working after pulling out the equipment)

Check whether the equipment is consistent with the car filling parameters