Single side board, FR4 single side, double side, multi-layer board, single side aluminum substrate, single side FPC, high frequency board, etc.              

           Surface treatment: spray tin, lead-free spray tin, rosin, OSP, gold, gold, silver.

      Sample making, plate copying, mass production, multi-layer rapid proofing, mass production, 24 - hour proofing, mold opening through - stop service.

            Proofing: 3 days (24 hours urgent), 6-10 days (3 days urgent) for multi-layer board, 5-6 days for FPC flexible board.
            Small batch: 4-6 days, depending on quantity, about 10 days for multi-layer board.

 Plates: FR4, high TG FR4, high CTI FR4, aluminum based materials, PI, etc.

A. Number of layers: 1-12.

2. Maximum machining area: hard board 1200*600mm, FPC flexible board 500*500MM

3. Thickness of finished copper:       0.5 3 OZ

Four. Thickness of finished sheet:  Hard board 0.2mm-2.0mm, FPC flexible board 0.08-0.32mm

Five. Minimum line width:  Hardboard 0.1mm/4mil, FPC flexible board 0.07 mm

Six. Minimum wire spacing: 0.1mm/4mil for hard board, 0.07mm for FPC flexible board

Seven. Minimum finished product aperture:  0.2 mm / 10 mil

Eight. Minimum resistance bridge width:  0.1 mm / 4 mil

Nine. Minimum profile tolerance: + / + 0.10mm/4mil

Ten. Wing curvature: less than or equal to 0.7% Flame retardant rating: 94V0

Reliability test: open/short circuit test, impedance test, weldability test, thermal shock test, metallographic microsection analysis, etc.