Vehicle charging positioner

Warm tip: we are pursuing the quality, practicality, sound clearer, more accurate positioning, longer standby time, not blindly pursue low-end products pit Meng broad consumer.

Using method:

1 first bought a new SIM card to open GPRS1. to a mobile phone SIM card

2 Boot: open the cover by indicating the direction to insert the SIM card, the product will automatically boot flashing red light 4 times, 30 seconds after entering the normal standby state.

3, bind the master control number; use the mobile phone to edit text messages sent to the alarm locator number, the machine back to reply to a text message; Set; binding + Master number

5. Voice control callback; using a mobile phone text message editor 666 is sent to the alarm locator number, the machine answer phone message at a later time; [DT; has been successfully set sound monitoring, alarm telephone callback]. When the alarm locator sound more than 40 dB around the sound, the alarm locator will automatically call the phone number set in advance.

6.GPRS location query: using a mobile phone SMS editor 777 sends the alarm locator number later this machine answering mobile phone a geographical location and the Google maps link, open the phone this link will appear after the location map and text address instruction, so that the location is more accurate.

7. The host state; using a mobile phone SMS editor 888 sends the alarm locator number, the machine answer phone message at a later time; [host all function on or off battery capacity to bind number, signal strength, start frequency, GPRS capacity of TF card].

8 restart the host; use the phone to edit text messages sent to the alarm locator number 1, and 999 minutes to return to success.

9 delete the contents of the memory card; use the phone to edit SMS 445 sent to the alarm locator number, and then the machine back to a phone; [TF, clean up the success of the current capacity]

10 turn off the function; use the phone to edit text messages sent to the alarm locator number 444, and then the machine back to a phone, [Reset; all tasks have been canceled]

Voice query around the 11 products: direct dial alarm locator card number, a few seconds to open up can hear the alarm locator surrounding sound (query alarm locator itself does not make any sound and light)

12 indicator light: turn on the indicator light often bright 4 times out, low power indicator light flash

1 machine battery: 400mAh Li-ion battery 3.7V

2 standby time: 12 days. Working time 4-6 days

4 continuous calls: 150-180 minutes

5 network standard: GSM/GPRS

6.. Storage temperature: -40 degrees C degrees to +85 C

7 working temperature -20 degrees C to +55 C

8 humidity range non-condensing 5%--95%

Basic parameters: frequency band GSM850/900/1800/1900MHZ

Support countries: China Britain France, Germany, and the Netherlands, Italy, Spain, Portugal, Brazil, Denmark, Russia, Poland, Turkey Hungary Thailand Greece Indonesia, Malaysia, Vietnam, Myanmar, Pakistan, Iraq, Saudi Arabia Arab States Kazakhstan

Often encounter problems:

1 Host can not be connected

Answer: mobile phone SIM card must be inserted after the boot will enable mobile phone signal, so you only need to put the machine off after the restart. There is your phone card is not in the server, no signal.

3 can not be charged?

Answer: to charge a GSM card must be inserted, if not impossible to achieve charging.

4 what is the main control cell phone?

Answer: is that you need to use it to monitor the anti-theft alarm phone.