content	specifications
S M/GPRS
network band	850/900/1800/1900Mhz
chip	Chip UBLOX
The sensitivity of GPS	-159dBm
GPS precision	5m
The start time of the first	Cold status 45s Warm status 35s Hot status 1s
car charger voltage	12 - 24V input 5V output
direct voltage charger voltage	110 220V input 5V output
battery	3.7V 850mAh rechargeable lithium battery
standby time	Hours 48
storage temperature	-40 degrees C degrees to +85 C
working temperature	-20 degrees C degrees to +55 C
humidity	Non-condensing 5%--95%

5.1 SIM card placed

Please make sure the SIM card did not open call forwarding and caller ID and opened PIN code in a closed state. Mobile phone SMS

must be plain text format, does not recognize the PDU format.

5.1.1 open the rear lid and take off the battery.

5.1.2 push back the metal sheet and pull it up.

5.1.3 the SIM card into the card slot, and the metal sheet is pressed to the original position to push forward.

5.2 battery charger and

battery in the first charge please charge 8-12 hours. Please use the battery charger and the unified configuration by the manufacturer, the standard configuration for battery

lithium battery and full power to normal standby for 48 hours or so, the normal use of state of the battery charge time is 6 hours.

warning

a: the battery is a lithium battery that contains harmful chemicals and may explode. Please don't throw it off, stab it and put it into the fire.

b: please charge in time to maintain the normal operation of equipment.

Start equipment 5.3

l SIM card and battery in place

l will be taken to the outdoor equipment and long press to open the key 4-5 seconds flashing lights.

l on first use, please initialize to default setting. In 10 to 40 seconds, the device will search to GSM and GPS

number and start the normal work in the normal state of light equipment will keep flashing once every 3 seconds.

l when the device receives the GPS signal is normal, you can use it and do a set of instruction manual in any.

attention * equipment, motion 20s upload a positioning data packets, static state GPS in the closed state, device is

vibration sensor discriminant motion (vibration) or static (shake), equipment by positioning the positioning state, the device will retain the final

GPS positioning data, set the fence and move the alarm, the device must be in a state of positioning.

5.4 initialization

send SMS "#begin#" to the device, it will reply to the "begin OK" and return to the factory default settings. (default

Password 123456) Note: initialization is equipment so the data restore factory default, such as restoring to the original password. Cancel the authorization number.

: send SMS "#begin#" it will reply "begin OK".

5.5 set a password

Set 5.5.1: send SMS commands "#password# old password # new password #" to the devices will change the password.

For example: send "#password#123456#888888#" to the terminal, the terminal reply password OK, modify the password successfully.

5.5.2 new password must be 6 digits in Arabia, otherwise the device will not be able to identify.

5.6 authorized

Please set the authorization number before use.

5.6.1 set authorization: send SMS "password #admin# # requires authorization mobile phone number #". If you set the authorized equipment will be successful,

reply SMS "admin ok". May authorize the two authorization number.

5.6.2 delete authorization: send SMS "password #noadmin# # need to delete authorization number #".

5.7 single positioning

5.7.1 if not set authorization number, any number calls it will reply to the latitude and longitude of information; if already set authorization number

code, an unauthorized number calls it will not respond to the latitude and longitude information.

Call 5.7.2 positioning: using a mobile phone to call equipment, the equipment will be hanging off your phone and respond to a real-time information of the latitude and longitude are as follows.

#smslink#123456# 5.7.3 SMS positioning : Send a text message, devices will reply a longitude and latitude of the real-time information as follows

5.8 text location query

5.8.1 this function is used first to good local GSM network of APN settings, if local need username and password to login please set (APN and

The username and password setting method hired see behind the APN set )

Reply local position information 5.8.2 send "#address#123456# will, such as:" East Baoan District of Shenzhen City, Guangdong Province, ring a

Road, away from the new one good supermarket about 20 meters. "

Automatic continuous positioning 5.9

5.9.1 send a message "#at#30#sum#15#" to the device, it will send a total of 15 times the latitude and longitude information sent a total of 30 times.

(default is s: seconds)

5.9.2 is not limited to the number of positioning: send SMS "#at#30#sum#0#" to the device.

5.9.3 cancel: send "#noat# # password" to the device.

5.10 monitor

The conversion between the two modes of 5.10.1 command to "track" and "monitor"

The default state of 5.110.2 is "tracker" (location state).

5.10.3 to send text messages command "#monitor# password #" to equipment, the equipment will reply you "monitor OK!", said has turned

change to listening mode.

5.10.4 send SMS commands "#tracker# password #" to the device, device will reply "tracker OK!" and restore to the positioning

mode.

5.11 mobile alarm

5.11.1 settings: when the device is stable stay within 5 minutes in a place, you can send SMS commands "#move#123456#" to

equipment, equipment will reply message: "move OK" open vibration alarm.

5.11.2 cancel settings: you can send SMS instruction "#nomove#123456#" to the device to cancel the mobile alarm.

5.12 electronic fence

set electronic fence can define the scope of work for the equipment, once the equipment operation beyond the set range device will automatically send information back to the

authorization number.

5.12.1 settings: when the device is stable stay within 5 minutes in a place, you will be able to send SMS commands "#stockade# dense

code # radius # "to the device can be set in a limit range, once the equipment beyond the restriction from the scope of the equipment will send alarm signal

information to authorized number.

For example , send text messages: "#stockade#123456#3#", "3" on behalf of 300 meters.

5.12.2 cancel the setup: send SMS commands "#nostockade# password #" can lift the feature set.

5.13 overspeed alarm

Set 5.13.1: send SMS commands "#speed# password # three speed value " to the device (assuming speed is 80km / h). For example:

"#speed#123456#080#" and "speed OK device will reply!". When the device is running faster than 80km/h, this equipment

will send alarm information authorization number.

5.13.2 cancel setup: send SMS "#nospeed# password #" can release this feature set.

5. 14 vibration alarm

Set 5.14.1: send SMS commands "password #vibrate# # vibration level # to equipment, for example: #vibrate#123456#3#

and equipment will reply "vibrate OK!". When the sensing device to vibrate, the device will send an alert message to the authorization number.

(vibration 1.2.3 level, 1 recognition felt weak, 3 felt strongly recognition)

5.14.2 cancel setup: send SMS "#novibrate# password #" can release this feature set.

5.15 emergency alarm

tight hold on SOS button for 3 seconds, the device will send a SMS "SOS alarm+ positioning information +imei number" to all the authorization number.

5.16 alarm

Set : send SMS commands "#KC# password # way #" to the device. For example: #KC#123456#1# and equipment will reply "KC

ok! "(0.1.2, 0 turn off the alarm, 1 alarm messages, 2 phone alarm )

Set 5.17 terminal time

equipment factory is +8 time zone.

send SMS commands: "#timezone# password # range # time zone # half time ", if set success, to return to the time zone ok

: six areas of the West. GMT-6, should such a setting: send #timezone#123456#W#6#00# ", w represents the present west district six time zones, representing 6

setting time code, 00 minutes difference.

5.18 GPRS set

GPRS before use, the user must by sending mobile phone short message set APN tracker, IP and port number.

5.18.1 set APN

Different 5.18.1.1 countries different GSM network operators APN are not the same, to understand you use the SIM card of the APN please to local GPRS network

network operators consulting

5.18.1.2 by sending SMS instruction "#apn# password #APN content #APN username #APN password #" to equipment if set to

power equipment will reply APN ok".

5.18.1.3 for example: send SMS commands "#apn#123456#cmnet#" to the device, if setup is successful, the device will reply message "

apn OK,

note: 123456 is the password, CMNET is China network operators APN. no APN username and password will not need to fill in.

5.18.2 set the IP and port

5.18.2.1 send SMS commands "#ip# password #IP address # port number #", if setup is successful, the equipment will reply SMS "set ip

And port OK address".

for example: send SMS commands "#ip#123456#58.64.200.27#6821#" (123456 set password, 58.64.200.27

is IP, 6780 port).

5.19 equipment status query

" send text messages #TCP#, query the status of the equipment, such as: send SMS instruction" #TCP# and equipment will reply SMS "IP + port +

APN+GPS state (A: Effectively, V:) invalid +IMEI number + number + alarm authorization

L personal safety

l management

l tracking crime

Feifan Technology Co., Ltd. is a professional R & D, production, development, sales and service of GAOKE

technology ltd.. With independent core technology as the foundation, specializes in the automotive GPS global satellite positioning

system. GPS tracker, personal positioning products, GPS individual positioning, personal tracker, auto

security equipment, car GPS, remote monitoring equipment, satellite positioning system, satellite positioning terminal, vehicle monitoring

control equipment, monitoring equipment for children and the elderly, children and the elderly to prevent the lost.

we honor "first is, after taking, honesty is the base, letters from people" concept of talent and humanized

management ideas, the spirit of "sincere service, rigorous and pragmatic, pioneering and innovative, scientific management" purposes,

is committed to creating a "pragmatic and efficient cooperation," culture of the team. In the process of rapid development,

gradually formed a unique corporate culture, the establishment of a visionary management team.

LBS as a professional high-tech Service Corporation, the company formed a scientific and efficient management system and

quality assurance system, including the establishment of a set of research and development and implementation of customer service services such as a full range of products

solutions, is committed to providing professional service position for the majority of users to "innovation achievements of the brand,

integrity casting the future "as the criteria, the company is willing to work with customers all over the world together to create business opportunities,

seek common development; "technological innovation, a decent life" for the purpose, the company will be as in the past to the world

people around the community to create a safe social environment and make unremitting efforts. Leading technology, function

advantage is the core competitiveness of products; advanced management philosophy is the core competition of the company.