Product introduction:

Name: one for five vehicle

input: DC12V-24V

output: 5V, 400mah-500mah

output interface: a
clip battery charger with USB interface with five types: car charger
use range: suitable for all major brands at home and abroad intelligent mobile phone, tablet computer, automotive navigation systems and equipment
introduction: fast charging with constant current and constant voltage IC explosion-proof, direct rechargeable battery clip five, a direct charge mobile phone, they can have the same time charge, a very practical multifunctional charger will automatically adjust the input according to the access equipment, the best quality, mobile phone battery to your highest saturation.

product advantages:

1, high quality IC control, the use of the most advanced environmental protection green power control technology, so that the whole temperature rise is small, light weight.
2, charger with temperature protection function, including the over temperature protection and battery temperature protection (the battery pack has a temperature sensitive resistor of the play).
3, the charger adopts constant current control precision, the current change rate of less than 5%.
4, built-in high quality switching power supply. Short circuit protection function,
5 charger, the short-circuit current is zero, allowing long short circuit without damage to the host. Input plug
6, can replace a variety of standard. Method of use:

1, the charger socket is inserted into the DC current 12-24V power supply, then the mobile phone charger connector and mobile phone or MP3/MP4 interface to connect the charger indicator lights display mobile phone charging equipment.
2, adapter, please select the appropriate voltage and current, because most adapter is line with the charger through the line to the output terminal, there will be some pressure, joint and length of line can be customized according to customer requirements.
note:
1, mobile phone and other equipment to be provided with a rechargeable battery can be charged, the charging process is strictly prohibited to load or remove the battery.
2, in use process, internal power charger device would have a certain amount of heat generated in normal room temperature, heating does not exceed 60 degrees is a normal phenomenon, will not damage the battery;
3, because all kinds of mobile phone or electronic products are different, the charging time is not consistent, this has nothing to do with the charging performance of the charger.
4, charging the charger from the power socket to dial, safekeeping, avoid damp;
5, mobile phone or with strong signal products in the process of charging, please make a phone call, especially in a thunderstorm.
6, do not place the charger wet or high temperature environment, indoor use only
; 7, a ban on counterfeiting and non rechargeable battery protection circuit.