陶瓷 电 烧 水壶 & nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; & Nbsp; 1. Beautiful streamlined appearance, from the finest materials after a rigorous test in line with national standards, environmental protection and yet elegant and elegant, noble and generous.

2. Imported stainless steel heating plate, boiled water without odor and easy to clean.

3. Boil 100% boiling and only 3-5 minutes.

4. Using the latest temperature controller, hidden in the chassis of the water vapor sensor controller in the water will automatically cut off after the power supply, safe and convenient.

5. Chassis modeling simple and practical, you can rotate 360 °, arbitrary display, full-featured.

6. classic firing a variety of beautiful patterns.

1. Open the lid to the kettle to prevent the heating plate in the dry state, the maximum installed water can not exceed the highest water mark and cover the lid, to avoid boiling water overflow.

2. Do not forget to cover the lid after installing the water.

3. Put the kettle on the plane, first put the kettle on the power supply chassis, and then plug the power cord in the socket, push down the switch, the indicator light, this time the kettle began to heat.

4. In the process of boiling water, if the power is still in the open state can not be removed from the chassis body.

5. If you want to boil again, wait 1 minute before you can turn on the kettle switch again, if forced to hold the switch, will damage the working principle of the kettle.

6. When not using the product, place it on the power supply base and the product will not work again until the switch is turned on again.

& Nbsp; Cleaning and maintenance:

1. To extend the life of the kettle, the mineral deposits in the pot should be cleaned regularly.

2. When cleaning, be sure to disconnect the power.

3. Do not immerse the kettle base in the water.

4. Let the mixture in the kettle for 24 hours after the mixture will be drained, and then into the water to a certain location, and then work.

5. drained the water will scale and vinegar fine away, and finally wash the pot with water, if necessary, please repeat the above operation.

6. In the use of electric kettle, in the event of failure, the pot should be removed from the heating chassis, drained pot of water, and then allowed to cool to room temperature before the fault detection or cleaning.