Usage and precautions

1. Before lifting, stop the vehicle on the level hard road, pull the hand brake and stop the wheel, and open the danger warning sign.

2. Stop the wheel on the opposite side of the tire, loosen the nut of the wheel, but do not screw it off.

3. Insert the handle into the screw jack, and shake the handle to the appropriate height by clockwise lifting.

4. Place the jack under the lifting position specified by the automobile factory, turn the handle clockwise to make the saddle of the jack contact with the lifting position, and check whether the contact is safe and reliable

5. Then, shake the handle to raise the roof of the vehicle to the appropriate height, change the tire and pre-tighten the nut.

Warning: when using jacks to support the vehicle, it is strictly prohibited to work under the vehicle. Safety supports must be used before they can enter the bottom of the vehicle.

Attention: jacks do not overload use!

Attention: in order to ensure the normal operation of the jack, please keep the screw pair of the jack clean and lubricated.