Paper steps
1. Open the paper clip

2. Hold the switch with the left thumb and index finger, pull back gently, and the bottom shield will pop open. 

3. Pull out a piece of price paper, drawing the paper out of the curve to increase the stiffness of the paper.

4. Pass through the gap between the big wheel and the guide frame and close the paper clip.

5. With the machine in the right hand, the left hand pulls out the price paper of about 15cm, and then aligns the holes of the marked paper and the big wheel, and then pushes the paper straight through the printing plate. 6, heard a sound of \"cut\", close the bottom board, paper was completed, and then by adjusting rod screw to print to print characters (note: white word is the CNS, convenient for the operator to know, really printing is corresponding to the black the words)

The process of the ink wheel disassembly.

1. Take the machine in the right hand, take the ink rack in the left hand, and put the side of the ink wheel into the machine first.

2. The protruding semicircle of the ink rack is stuck in the semicircle of the machine.

3, the left hand to push the ink rack slightly and stay on both sides of the small card points also completely buckle into machine, ink installation is complete, open ink steps on the contrary, the index finger in ink rack bottom (the circle there is a triangle       The shape of the place) to dig out.