301Characteristics of glue:

1, universal adhesive type! Quick bonding speed!

2, the adhesive material is more common, the glue bonding requirements are not high, and the amount of relatively large, economical and applicable.

3, can super glue all kinds of plastic, leather, rubber, wood, ceramics, and so on.

302Characteristics of glue:

1, super adhesion! Quick bonding speed! Low bleaching!

2, professional solution to customer adhesion problems, the factory direct sales, according to the customer adhesive materials, deployment of the best quality, reasonable price of glue, so that the customer satisfaction.

3, can super glue all kinds of plastic, leather, rubber, wood, ceramics, TUP soft materials, TPR soft materials, silicone products and other materials.

303Characteristics of glue:

1. Medium consistency of glue! Half a flowing Average bonding speed!

2, professional solution to the rough surface of the material, the bonding gap between the two relatively large objects.

3, can also ultra various plastics, leather, rubber, wood, ceramics, TUP soft materials, TPR soft materials, silicone products and other materials.

306Characteristics of glue:

1. High consistency of glue! Don't! Slow curing speed!

2, professional solution surface rough porous material, glue does not flow, can be rigid straight adhesive.

3. Mainly used for joint filling, hole filling, fixation and adhesion.

307Characteristics of glue:

1, super adhesion! Quick bonding speed! Low bleaching!

2. Solve the problem of whitening glue professionally.

3, can super glue all kinds of plastic, leather, rubber, wood, ceramics, TUP soft materials, TPR soft materials, silicone products and other materials.

309Characteristics of glue:

1, super adhesion! Quick bonding speed! Metal bonding type!

2, professional solution of metal, stainless steel, mold, aluminum alloy and other materials bonding.

Ii. Technical parameters

Iii. Usage:

1, choose the right instant dry adhesive: according to the bonding material and bonding requirements, choose the right instant dry adhesive.
2. Pre-treatment: the surface of the adhesive material shall be clean, and the bonding surface shall be smooth and consistent. If the adhesive material is difficult to bond must be used corresponding treatment

The agent has been treated or selected to have the corresponding special allocation of adhesive can be glued.

3, gluing: generally choose a large area of one side of the gluing, according to the requirements of gently gluing and combining well, with a little pressure on the fingers, so that the glue distribution is uniform, the thickness of the rubber layer should be less than 0.1mm, each drop can be coated with 3-4 cm2, the use of instant dry glue the thinner, the greater the bonding strength.

4, cool buy: led a few seconds, loosen finger gently, put in hollowness and smooth place cool buy period of time. This can reduce the albino phenomenon, after the surface drying can be the next step, 24 hours can reach the highest intensity.

2. Albinism:
Ethyl cyanoacrylate monomer has a high vapor pressure and is easy to volatilize into the surrounding air. It condenses out around the material and forms a white low-molecular polymer, which affects the appearance of the material. This is albinism. Measures to reduce or avoid albinism include:

It is the most effective method to choose the open, dry and ventilated environment and adjust the ventilation.

Pay attention to the amount of glue, avoid excessive use of glue, and make a lot of glue overflow;

Wear disposable PE gloves to operate, avoid direct hand contact with the material to be bonded around, as soon as possible assembly components, or choose the machine glue automatic bonding

Lengthen cool time, such as completely dry before packaging;

Sometimes the weather is too humid, air humidity is too big, severe albinism, try to avoid such weather under the operation.

Low temperature in winter, slow adhesion, can properly improve the speed of glue adhesion; On the contrary, the summer temperature is high, can properly reduce the speed of glue bonding.

Choose suitable instant dry adhesive with instant dry adhesive accelerator or instant dry adhesive with higher performance.

Safety precautions for storage and use:
Storage environment: store in a dry and cool place, away from direct sunlight, and place in a place with children. O contact.

Do not wear rubber or cotton woven gloves: rubber gloves will be glued upon contact with glue, while cotton gloves woven materials can absorb the glue and rapidly polymerization reaction, reaction heat will burn your hands, so do not wear the above gloves. Please choose to wear disposable PE gloves.

Maintain ventilated: instantaneous glue vapor has irritant or urge tear sex, can stimulate an eye, but avirulent, the workplace that chooses clearing when using in great quantities and maintain ventilated good.

Leakage:When a large number of leakage can be water curing after scraping.

Emergency treatment:Be careful to slowly stretch the skin and peel away after unfortunately sticking to the skin. Immersion in hot, soapy water also helps with stripping. Non-toxic gel solutions or nail polish remover can also be used. If cyanopropionic acid glue accidentally enters the eye, rinse immediately with plenty of water and seek medical advice.

We can customize according to customers' samples. Contact information: 13002654977