Voltage: 220 v / 50 hz

Power: 1350 w

Production capacity: two minutes per plate

Dimensions: 650*417*770mm

1. Meticulously made, bold innovation, more stylish, beautiful and generous
2. Break through the existing technology, the box cover adopts concealed ring hole heat dissipation system, which can avoid the motor working in the state of overheating and extend the life of the motor, which is better than similar products
3. All sides of transparent reinforced glass, can fully reflect the production process of blasting valley, safety, health
4. High efficiency heating and insulation system, so that the production process to reach a convenient and fast level

Western restaurant, cinema, hotel

 1: the firstThe popcorn machineTurn on the heating switch, put in 50 grams of peanut oil, press the rotary switch, preheat for 3 minutes, then turn off all switches and pour out the peanut oil. (By this operation, the service life of the new machine will be increased more than twice.)

2: Turn on all function switches (lighting switch, heating switch, rotary switch), then add 50-60 grams of special cream for popcorn (or coconut oil, frut-flavored oil), and 100 grams of special corn for popcorn. (The wok must be preheated for 3 minutes), finally putCommercial popcorn makerSpecial white sugar 60-70 grams. Then lower the lid and close the glass door.

3: Operators should pay attention to the situation of popcorn, such as pop sound becomes smaller, rice flowers burst out in large quantities, immediately turn off the heating switch, and then continue to rotate for 3 to 5 minutes, immediately pour out

4: Clean the bottom of the pot, wipe the pot with a half wet towel, (if the bottom of the pot is scorched phenomenon, should immediately add 150ml boiling water, water can cover the bottom of the pot, and then heat rotation for 10 minutes or so), make it clean before the second pot.

5: After the popcorn machine is stopped using, keep the machine clean and tidy. There is no oil stain or water mark on the glass. Garbage plates must be cleaned in time. Turn off all function switches and power supply.